Viewing all customer Discussions for:

82-238 Double Hook Mortise Lock

The lock and latch from the sliding glass door in the pictures needs to be replaced. The lock has fallen out and the lever that latches the door has broken. The only markings on the door I can find are SGD-LC25-96 X 82. The mechanism/handle is 7" high.

Here are photos I was unable to attach to my previous message.Louise

door is 2" thick and screws are 5" apart. says made in New Zealand with letters IT on lock mechanism. what do you suggest?

I have a 2013 Thermotwin Glass Sliding door and the handle has broken as shown in the following pictures. Do you have a replacement handle or something that would take its place?Thank You,David

I ordered the 82-238 to replace my broken mortise lock along with what I think is an 82-080 handle but they don't seem to fit together. What I think was the 82-080 came with a striker and a different double hook lock. Should I re-order the 82-080 that doesn't have the double hook lock? ... (cont.)

I'd like to replace the outside lock handle on this door with a keyed lock handle. The door is by Certainteed from the early 2000's.

Only the sliding glass door handle is broken apparently because of a broken screw and the lock works well. There is about 5 inches between the two interior screws with the handle mechanism falling half way between on the interior of the door. It has a nickel finish

Hello, We just purchased the 82-081 handle set for patio doors. The hand set fits like it should. However, the mortise lock holes do not line up with the handle set. Do you have any suggestions? Pictures attached. Do you have a mortise lock set that fits the handle?

Need to return other parts

I am looking for the 2 replacement door handles and all parts that go with my hurricane proof sliding glass door. My door has three handles. The handle is 7" high. Two on the inside and one on the outside and the outside of the other door does not have a handle. I am ok with anything you have as lon ... (cont.)

I need the central latch (doorLatch.jpg & doorLatch2.jpg). The top & bottom latches are good. They are ganged to the central latch via a flat rod that mates with pins. You can see the pins to the left of the hook on doorLatch3.jpg. It looks dimensionally similar to https://www.amazon.com/gp/product ... (cont.)

HelloCould you please help me with this patio door lock that needs replacement. It is the main lock and there is another lock mech about 25" above and 25" below. There is no name anywhere on the patio door Thanks for your helpArthur

Hi! Can you help identify the part I need? The hook in the middle broke off. Thanks, Lisa

Have a 2010 series 5621/5631. Would like to add a lock to be able to open from the outside. Ideally a smart and/or programmable, but don't see those as options quite yet for sliders, so a key likely the best next bet...

I believe the part number is 82?081

Hello, i am interested in replacing my sliding door lock with one that has an outside Key Cylinder to be locked from the outside. I found on your website Keyed Mortise Style Handle Set, 4-15/16" Product Code: 82-081. but wanted to make sure it fits first. I added some photos here. i think its Milga ... (cont.)

Hello all, Checking to see if you could help with identifying what the received part would be for this lock many thanks

can't find it anywhere

exterior sliding glass door, inside handle/lock mechanism broke off. Track was dirty and wear and tear of pulling handle caused it to snap off....seeing if your company has replacement part.

The inside handle broke off of our sliding door. The door is about 17 years old. We are looking for something to replace to fit the door or just the handle itself. It measures 5 inches screw to screw. Any suggestions would be greatly appreciated.