Viewing all customer Discussions for:

15-186 Coil Balance Clip

I am looking for this type of balance for a single hung tilt window. The only marking I can find is a symbol that looks like "B" and 932 stamped on the coil spring and a number 3 printed on the inside of the slot.

Hi, do you have any like that?

I moved into a condo that has Silverline single tilt windows. Some of the seals were broken and those windows have been replaced. When replacing the windows, I noticed that some of the pivot shoes(?) stay in the down position when the windows are raised. Do these pivot shoes have to be replaced? ... (cont.)

Hi, my bedroom slide up and down windows (2) side by side windows coils and the parts got broken, so the windows are sliding sown to the bottom always, no way I can keep it up (open). Windows measurement: 32 inches X 32 inches I appreciate the replacement parts to fix this issue. Thanks Madha ... (cont.)

8 windows and no brand name, hope you can help, ty

Hello, I am looking to order some replacement coil balances but am not sure which to select. Attached are pictures. Do you need any other identifying information?Regards,Adam

I know I need to order the 15-180 and the series 190 coil. My window weighs 20 pounds. Can you please tell me all the parts that I need to replace the entire mechanism for my window. I know I need to order 2 of each to replace both sides. What coil, do I need the balance bushing, the clip and wh ... (cont.)

I have several of these exact same windows in my home, with several broken pivot shoes. Is there a way to identify the part I need so I can order replacements for all of the other windows in my home? Other than being a little tight when they rotate, these pivot shoes work great. The other shoes in t ... (cont.)

I am trying to fine this part WIDE 1.5 THICK 1\4

I would like to identify the correct replacement parts to repair the attached broken parts.

I have about 25 of these windows in my house and not a legible label on any of them. They were all installed about 20 years ago. This broken one is the upper window in my bathroom, it probably sees the most motion of any of the windows. Your help is greatly appreciated. Andy

There's no markings on the window. Original window from construction built in 1999.ThanksEric

Hello, can you help identify this coil spring? The one in the pictures is from the left side of the window. The right side is completely missing the spring. There are no labels/markings.

I'm wanting to order what parts I need for a 31 3/4" sash. I think thats the spring length, 22.2 lb sash. I would like enough parts for 3 identical sashes / windows. I also need one more with a sash that's 20" and 15 lb., it's the bathroom sash ( see pictures.)Thanks for your help,Brian ... (cont.)

I'm looking for a coil spring balancer for a model 350 windows and doors. Can you help ???

I have a vinyl window aproximately 33 1/2 inches across 35 inches high? That won't stay up? I've sent photos of the top and bottom right and left hardware? Wanted to find out what I would need to replace this hardware thanks? Rod

Hello the windows does not stay up model number is in the pictures

Obviously, the coil spring is broken. I guess I could have included the broken off piece of the spring coil in one of the images. Let me know if you need that.

It is hard to see but on the 'a' picture on the right it has a '5' in there. I weighed the window and it is about 19#. There are two coils on each side so it looks like each side takes like 10#. The coils are .5 inches wide and 1 inch diameter. The whole thing when not broken to pieces is about ... (cont.)

Tilt latch Sash guide? Universal window 31 1/2 x 59 3/4 3500 2005-07-22 129808-01 (3500), 2850,WH,FIN,7/8 FLAT,6/6HORZ,NO J