Viewing all customer Discussions for:

38-096 Maxim Multi-Point Lock, Long Slider

Hi, we need to replace the casement operator and locks for two windows. Thanks, Ana

We built in 2003 and builder filed bankruptcy and included us as we have had issues with our Vetter windows since day one so I am hoping you can help us. There is absolutely no information on the windows included in the book that we received from the builder. We need 5 of the latches for our casemen ... (cont.)

No name or number found on the lock but the swing operator hardware had the word truth with an arrow pointing up with numbers 32850 and on the bottom has numbers 062722003 1246 just in case that helps. I'm searching for 2 right swing operators and 1 lock

I am looking for the casement window lock to replace my broken one. I can't seem to find it anywhere or am looking up the wrong terms. Can you please help me find this part? On sticker on the window it says: 4148 casement p.l.#466-004 Seeking the casement side lock for the window. ... (cont.)

Window locking handle broke with linkage inside .... Also need new screens....

Our window crank has a broken tooth on the drive gear and needs replacing. It is stamped with the part number 31512. Our window latching lever is broken and needs to be replaced See attached photosCan you recommend replacements for both of these items?Thanks, Sean

Hello,My name is Larry in California, I have a casement window that needs a replacement lock. I am unable to unlock and open the window to get accurate measurements. Can you please advise what product would be the best replacement for the existing lock on the picture? The overall length is 4 1/2" lo ... (cont.)

This is a latch for a casement window. It has zero identifying marks on it. The mechanism has stripped and I would very much like to find a replacement. Thank you

Im looking for crestline replacement parts, the lock looks like a 38-095, the clip or nylon guide i have not been able to find.

Can you help identify this door lock? I am in Canada, Thank you very much. Bin

Can you help identify this door lock? Please let me know the part number and pricing if you carry it. Thank you very much. John

I need this part replacement since this on is broken

Looking for these

Looking for this locking mechanism. The only thing it says on it is ROTO. The window appears to be SNE corporation. It is a casement window. The holes where it bolts to the window are threaded.Thank you,Rick Warehouse Manager

Looking for this locking system

The homeowner wants to change these items to white. 2 operators and 2 locks. Windows are a milgard brand. Series 3510 casement. Product line is 032-167. There are no part numbers on either the operator or the lock.

Looking for a window lock.

These windows were installed in 1999. I need to replace the operators and locks

Hi, i need a replacement latch/handle assembly for a traco casement window, please see attached photo Baseplate holes are spaced roughly 3.8" on center and the baseplate step that passes through the window flange is .429" wide by 4.250" long -Adam

The casement lock is from a window in a condo I own. Per the contractors proposal the window should be either a Harvey or Plygem. The color is beige/almond. Any help you can give me in identifying and getting a replacement part would be appreciated. I found the label at the top of the window. It ... (cont.)