Viewing all customer Discussions for:

18-171 Stepped Sash Guide, Alpine

The part is located on top /side of the window frame. Non tilt window. ? " wide by 1 ¼ " long.

Please let me know the correct Sash, I attached photos hope will help.

white sash cam Length: 1-3/4 inch top width: 3/8 inch bottom width: 5/8 inch has two holes

Would you please help in identifying this sash guide and provide me with a part number. I was not able to identify any numbers letters or manufacturer.

Hi, I need to replace many sash's at my house but none have a part number. The windows are Pacific Windows and I'm in SoCal

These go on the side of a vinyl sliding window. The 21.5 " sash balance hooks onto it. I have several of these that have broken.

Please identify sash guide and provide part number.

Hi I have Milgard windows where I need to replace the balances, take-out clips, and shoes. Balance is 27" long and says 26 5 FS Caldwell on it. Can you please help me identify which replacement balance I would need? Thank you. Dan

40"x46.5" (WxH) With 1/2" wide balance. first two photos are what is in the hanging window, second and third are the right side of the frame second is the left (top is the same as the first picture on the r.h. side of the frame. The hung window is a 23 and 2/8" height. I hope you can help. Let me k ... (cont.)

This part was on the operating window sash. On a single hung window. This piece hold the Channel balances in place. Need a new one not sure if the name or company

One of the window sashes that broke. length: 1" and 3/4" Thank you.

Mine is broken. Attaches with screw on window side edge to hold balancer in place once engaged.

I have a 26-4 27" which looks to match either an S380 or S385. My bottom show measures just under 1" so assuming S380. Also, I need a top cam replacement?? It's the part that screw into the window frame. See picture of broken and intact to see what I mean.

Hello I have tried to match this top sash guide and have ordered 2 and were not matching I need help identifying please

Top sash guide and window Chanel balance for a Viking window. BSI 2930 part number

Hello - I am missing both Channel Balances from a single hung non-tilt window. The brand of window is unknown / unmarked. Hope you can help me identify which channel balances I need to order. I believe Channel width was 1/2" because the vinyl trough where it goes is almost 1" wide.Thank you! Rho ... (cont.)

I have been searching for days to no avail. Can you help me find a top sash guide that will fit my windows? the bottom width is 5/8" the overall length is 2 1/4", the top width is 7/8". I need several. See photo for more information. Thanks.

I believe these are from an Atmos window. overall length is 2.25", lower width is .625, upper width is 13/32 and depth is.50 and flush on the outside all the way up. The only marking is the number 6 below the top hole.

I think I need Stepped Sash Guide, Alpine, Product Code: 18-171. I am attaching photos to confirm before I submit my order.

No numbers could be found. Please advise. Thanks!