Viewing all customer Discussions for:

18-171 Stepped Sash Guide, Alpine

Hello, Trying to find this sash clip or one that will work as a replacement. Thanks, Wesley

I have channel balance stamp with 26 5 GW CMC 10, measured length metal part only 27 1/4, with plastic ends 28 1/16, channel width 9/16. I also need a small part screwed in the side of the window, see picture with the red circle. Thank you, Sean

I just ordered and received from you some S385 channel balances, and came to find out most of my top sash guides are broken. I found a couple of these 2-1/4" guides on your website, but not an exact match. Your 18-008 doesn't have the stepped back, and your 18-171, which is the closest match, doesn' ... (cont.)

Hello, I need a replacement window balancer like this one. It is just under 27 inches long. This is the one from the other side that is not broken. I would like to order two of them if I could, With the fast shipping available to Hawaii.

I need help finding this type of sash guide

Hello there, I am trying to replace the window channels for my window and need -- 20 inch channel for a sliding window (no tilt) - need 3 units I have attached 5 pictures based on your YouTube video for identifying the correct part. Please let me know how to proceed. Thank you, Nitin (homeowne ... (cont.)

I have a window in a house I bought that does not have a balancer. It also has a broken assessors piece on the side of the window. I am wonder which parts to buy. The window is pella brand. The window glass without the edges is about 22 7/8" long.

I'm looking to replace several broken plastic parts that attach to the side of single hung window frame. The part engages the window channel balance. I've attached two pictures - one of a functional part attached to the window and one broken part removed from the frame. Do you stock this part? ... (cont.)

Bought 18-008 and got them and realized that the old ones are narrower and step up on the back. Looking on your site nothing the same.

I'm looking for the pictured part it goes with my S351-31 window springs. I would consider it to be window hardware. I need this to mount the window springs into my window.

looking for sash guide for balance being used are the 351-33,351-30. and 351-27 on a Hurd Vinyl window, is very similar to 18-171. just not sure on the offset or is its flat. Should have checked that. any help would be appreciated. Thanks Glenn

Print on channel says "26 0" CX CMC 7" channel metal is 27"

this part is attached to the side of the window. this part i beleive attaches to the balance.

What balances do I need. And retaining clips

I can't seem to find this style of top sash guide. Help! I am ready to purchase your channel balances (S350-28, option 2760) but need to replace one of the top sash guides.

This is the part that mounts in the channel top right hand side of the slider portion. It is mounted with a screw and engages the balance when reinstalling the window. Without this the balance stays in the upper position

27 in.26 3 in 5 cmc 43I need the sash guide also.Thanks

No makings

I have a window that requires replacement of the two balancers on each side as well as the plastic sash guide.

do you carry this sash cam?