Viewing all customer Discussions for:

39-348 Sill Mounted Awning Operator

Need replacement part Truth mechanism

Need a replacement for my Truth 45142 crank. Measures 24" hole to hole. Any help would be appreciated.

The retaining bushings are coming loose and I cannot tighten them. Do you have a tool for this?

Need the operator for a Marvin awning window. Our casement Windows use the 39-031. Arm 12.5" from pivot to pin

I'd like to replace the crank mechanism unde the handle in which the gears are stripped. Not sure if I need just the crank mechanism or the arms connected to the crank. The sash bar is 23" long and the two arms look to be about 9" long each. The handle case is 51/4" wide (left to right), about 1" ... (cont.)

Have a look at my operator. It looks similar to yours except my measurements appear to be a little less than yours. Will this still work?

My operator has a # on the back. It is 45002.The hardware is made by Truth.....

I am just needing the clips at the end of the arms on the 39-348

This window crank is from a older model Hurd window wood casement window. The arm on the window crank is approx. 1.50" from the end to the bent corner and about 10" on the longer straight arm to the slight bend on the arm. On the window crank it says "Truth" stamped on the metal arm. Underneath t ... (cont.)

Looking for replacements. They have the inscription Truth on them

Hi I have a casement awning style window from 1993 on a second story. The handle appears to be stripped and will no longer allow the window to be cranked opened or closed. I do not know the brand and I haven't been able to locate any numbers or markings. Do you sell a handle unit that might work? ... (cont.)

The handle says Weather Shield and truth. See no part number. The other part has a number of 45301. Thank you.

Weather Shield awning window operator system, circa around 2003, need to be replaced. The operator arm (not the crank) is stripped and the window cannot be closed.

trying to figure out what parts I need to order for these three different window operators that do not function

Need to order not sure of part number. It is a church opener. Has 4 screw hold hidden under sill Have handle

My awning window has 2 "bars" that slide along a stable track on the window. The problem part is the right side bar where it becomes disconnected at the elbow hinge and then the window doesn't close all the way. I am guestimating each bar is approx 11 inches but it goes into the frame on the buildin ... (cont.)

I am retired from the window industry and thought I "knew it all." However, We have just purchased a home built in about 1993-1994 that has Caradco casement and awning windows. The operator crank has a metal cover (verses the plastic pop off type) and I can't figure out how to remove it. Could yo ... (cont.)

I was looking at the Swisco product code 39-312 but I also need the slide shoe that goes in the tract as one of them is missing. I could not tell from the picture if this slider shoe is included. If not can a part # for this be identified

I am looking to purchase five (5) each of the Large Operator and Gold Finish. My windows were installed in 1996 so I am looking for that particular mode. I only need the operators, the handles are working great.TobyPlease call me on my cell when you research this part for me. Thanks ... (cont.)

(Truth)was stamp on arm