Viewing all customer Discussions for:

S160-09 9 lbs Series 160 Coil Balance

I have 6 Simonton windows that need new coil balance assemblies. They are all single hung 3 coil - and the moveable pane is ~ 18 pounds. The photo shows the current parts. Each has 2 coil assemblies. Can you share part #s to replace ? Thank you!!

I'm looking to replace a couple of my coil balances, one is for 9 pounds and the other is for 10 pounds. They are MI Windows

I need to replace about 80 of these With new pivot shoes

Hello, looking For replacement window balances and shoes. I cannot find the window make anywhere.

I need to order balancers for several windows that have broken. Simonton 1994 windows.

Would like complete assemblies if available. Otherwise,I need two coil balance springs. Only numbers I can see in the plastic is a patent # 4.610.108. Also a number on the coil is 6 or a 9? Window sash is 22.5"x 22.5"x 1.5" thick. Window channel is 1.25" wide.

Coil balance spring 9.0

Says #9.0 35" stamped on it. Seems like series 195, 196 or 160.

I have two broken coil balances in each of two window frames, and I need a little guidance on selecting and installing replacement parts. The windows both weigh 16 pounds, one is 25" tall and the other 28". The top part says #9.0. The springs and snapped down to the shoes, and they read #9.0 and 35" ... (cont.)

I need a window balancer. I ordered these parts before. I believe it is S160-9, 15-199, and 15-150S. the window is 23.9 pounds.

Hi Not sure if I need 6 or 9 strength coils With the hole at the bottom it reads 6 but the shoe had 18 marked on it I'm in the UK and coil springs are pretty unusual over here only seen a few in 20 years but want to attempt this repair,from your site they look like s152 coils Thanks greg ... (cont.)

Hi, I would like to buy replacement coil balance hardware for a Milgard double hung window. The coils for the upper sash broke as shown in the attached photos. I figure I might as well replace the coils for the lower sash while I'm at it because they probably aren't far behind. The coils for the upp ... (cont.)

I have one broken balance spring on a Simonton double hung window. Reading the numbers on the spring would seem to indicate it's a 35" spring with a 9# rating. (see) images. I would like to purchase a replacement and a couple of spares. I'd also like to purchase replacement holders. You selectio ... (cont.)

Hi, Never did this fix before, saw some videos so have idea what's wrong and how to replace. Window won't stay up and I heard a load snap/bang at one point. I see a metal coil "broken" between top and bottom pieces in the window jam, which appears to be part of a balance? Looking towards outside of ... (cont.)

Hi there. Emailing from UK. Can you help. I have UPVC sash windows. They've been in for around 15yrs. It appears the coil balance has snapped and distorted the other 2 coils (top sash had 3 coils on it). Also noticed the balance shoe on the other side is about to fail with screw just handing onto th ... (cont.)

I was told to contact Swisco for help finding these coil balances for my SImonton Window. Can you help?Thank you,Tom

Hi I am looking for a price on a left and right coil spring balance 9 lb for a Pella 150 series window. I will also need the mounting tabs to attach the coil spring to the frame. Do you have this part and when would you be able to ship it? I will need 2 sets ( enough to repair 2 windows) Thank yo ... (cont.)

Hi,I have a couple of American Craftsman 70 Series windows that have problems with the spring coil assemblies. In one window a spring is broken, and in another the plastic support has shattered. I am providing pictures of the parts where the support has shattered.I wish to replace the entire assem ... (cont.)

I have a Pella ThermaStar double hung window. I have a clear plastic clip that gets screwed into the frame that the coil end gets hook into. My clip is broken and won't hold. My problem I found a clear clip on your web site part number (Product Code: 16-032) but it isn't the same shape and it has 2 ... (cont.)

Need replacement 3 coil spring. Springs have #90 35" on the end. Pictures attached.