Viewing all customer Discussions for:

39-350 Look/Rusco Awning Operator

Awning window parts The swingarm has a measurement of 2&5/16". All other measurements are the same as part number 39-350. I need three left hand and two right hand actuators. I also need three shoulder screws 33-070 torque bar bearings 36-018H. Thank you William

Hi I'm looking for the gear box for my lemco 30 window, it's stripped out

Crank just spins and doesn't move window. I am unable to remove the bolt that attaches the lever that I am supposed to b able to remove. Any ideas? This house was built in 1979. Thank u for your time.

I just bought your 39-350 look-rusco operator, RH model. Do you have left hand versions of these? Also, one of the photos shows the actuator arm located towards the center of the housing...Is this true? if so, great, as other similar named operators from other vendors have the arm right up against t ... (cont.)

I need a replacement operator that will last. The ones that I am buying from home Depot don't fit right and they don't last. The picture of the brown operator is an original one that is more than 10 years old and still works great. I need a replacement like that one. Also, I need oversized screws. ... (cont.)

I, too, have LEMCO Series 30 awning windows. I am looking for the LEFT HAND crank.

See attached photos, including one photo of a sketch of the dimensions of the current operator.

I need to replace 4 Crank Operators 2 left and 2 right. The photos I have included show size and I can provide what ever you need for information. Thank You, Hank

Hi Swisco, Here are photos of what I am looking to replace/repair. Product 39-194 is close; all measurements correspond EXCEPT for the 3/8" hole (mine is 3/16). And as I mentioned- when all folded in, on mine the arms fill the casing. Thanks for your help!

I wrote on your youtube for awning window winder and your website here asking for help and sending you pictures since not hearing from you bought Barton Kramer at Ace it fits as a replacement for the damaged stripped unit i had in my 1969 Condo in Miami Beach but never heard back from you since your ... (cont.)

need 3 handles please

Windows are Lemco Series 30. I have just one that is missing the crank handle and whatever parts connect the handle to the arm.

I need what looks like a left and right version of the 39-350. The only difference is mine has a 3/8 thredded hole. Do you have 2 like that?

Need help getting the correct crank replacement for my aluminum awning style casement window. The home was built in 1948. I'm not sure if the window is original. I can't find any markings or names on the crank or the window.

The 39-350 I ordered (lower unit in pictures) does not have a screw and bushing to attach the control arm to the window control arm. See my old unit which is the upper unit in the attached pictures. My pen is pointing to the bushing and screw needed. Can you provide me with a part number to obtai ... (cont.)

Hello, I have to replace several dozen cranks, and am unsure which is the correct Pan Am crank. I've included several photos, if that is of use

For a small bathroom window.

I have 3or4 broken window operators and the PanAm/Daryl crank seems to line up closest. Mine have 2 15/16" link arms with 1/4"threaded holes and only one hole at the top right of center. I may be able to drill a 3/8" hole in the corresponding window arm and use a 3/8"shoulder screw. Will this wor ... (cont.)

trying to replace a window crank that has broken. very similar to the 39-025 BUT the bottom hole spacing that is 1-1/8" on the 39-025 is is 1-3/8" on the broken one. the link also measures 2-3/8 rather than 2-1/4. the 5-1/4 checks. note also that all the mounting holes are just inside the cast ... (cont.)