Viewing all customer Discussions for:

15-198 Balance Clip Attachment

I need several of these balances. The one on your website has a different type of connector at the top that attaches to the window jam. Don't know if this will work.

20B block and tackle sash balance 6.5" spring plastic piece on end is 1 5/8 long and 1/2 wide

Hi, I have these 16 year old Milgard Tilt windows that were in the house when I brought it. Milgard will not warranty them anymore. A couple of balancers are broken, others hard to operate. I would like to replace them, but do not know what to purchase from you.I believe they are channel balanc ... (cont.)

These pictures are from the window balance of my fiberglass Pella window purchased in 2008. It is from the bottom window. The pivot shoe at the bottom of the balance broke. The pella part number is 22BBI (or maybe 1) with small letters following VA. I need the right and left balances from the bot ... (cont.)

I NEED THE 15-198 CLIP ATTACHED INSTEAD OF THE ONE THAT COMES WITH IT Channel Balance Series: S795 Channel Length: 30 Channel Stamp: 30C Quantity: 2

I need a window sash balance. It is 21" and is stamped with 20D (attachment)

Hi guys! Looking to see if you have an exact replacement for my 20 D BSI inverted block and tackle balance, the bottom part number is 4610108 for the cam portion!

Hello, can you please help me with identity the coorect shoe balance for the window.

Below are pictures and descriptions of my window balances. The plastic parts / pulleys have become brittle and are breaking. I hope with this information you can help me with replacements. I have 6 windows, (12 balances), that I want to go ahead and replace at this time that are all the same as d ... (cont.)

Hello, we have some Jeld wen windows , series 9980/9980p, h-r20-48x77 / h-r25-44x60 The balancing springs are very noisy and likely need replaced. Is there something else I can do to quiet it down first or replacement better? Balance is 28" long for the metal part covering the spring. I have had ... (cont.)

I need new channel valance and shoes for the top and bottom sashes both sides

I have 6 of these that have broken off the windows. The only marking is 27B on the back. They are all the same size with the same type of swivel connection that attaches it to the window. The length is 27 inches on each, not including any plastic. Can these be replaced? If so, the cost for each on ... (cont.)

Can you identify the parts needed from the photos attached. I will need a new catch, shoe, and spring. The spring is 16 inches long and the winow weighs 45 pounds. Thanks, John

Hello I need to order a 28" Series 795 balance with a stamp option of 28C. My windows have a hook and a round hole, not square so I need the hook on them. Also I need the 15-194 1" T-Lock Balance shoe, closed cam for these. so I need 10 S795-28 for stamp Option of 28C with a hook on them nbot th ... (cont.)

Looking to repair older Farley double hung window. The rope has snapped and Clip/Tilt shoe have broken apart. The balance stamp #28C. I'd like to order all parts needed to repair. I believe it to be 62-716C, 62-5007C. I have attached pictures that hopefully will assist w/ parts. Thank you ... (cont.)

Single Hung Tilt Window Our house was built in 2002-2003. I need 2 new balances for 1 window

Please help identify

Hello I am trying to get 4 replacement window springs, with a hook at the top and a plastic contraption with a metal hole at the bottom. Length 33"

Hi, I am looking for 3 balances like the one in the photos attached. the balance is 5/8" wide and 9/16" thick.

Trying to figure out which pivot bars & balances I need for this window. Thanks