Viewing all customer Discussions for:

15-198 Balance Clip Attachment

Hello, I am looking to order two 30" Series 795 balances with the hook installed on the top. My shoes are 1-1/4" closed cam, with a stamp of 30D. Thank you!

Markings...32B. BSI. tj Block and tackle.

lenght 26 inc

Window balances 32"

Can you help me find the correct channel balance?

Hello, I need help in indentifying the series number of this part in order to replace. Code # C34 is stamped onto the back of the metal channel. There is also stamped an RC BSIN (or B5IN). Metal to metal measurement is 34 inches and channel width is a hair over 1/2 inch. The plastic attachment h ... (cont.)

I have several MW Window single hung tilt vinyl wondows that I need to repair. Many of my balance shoes have broke. I believe I will need to replace my current balance's with new ones, due to the shape of the bottom end of my balances won't accept the shape of the "1 T-Lock Balance Shoes Closed Ca ... (cont.)

I am writing to request a quote for a custom sash weight balance.The specifications for the balance are: a weight of 10 lbs, a length of 28 inches including the swivel mechanism, and a length of 27 inches without it. I need one balance in total.Please let me know the cost, any associated shipping fe ... (cont.)

I need the S795-28C with the 15-198 hook at the top and a 15-194 one inch shoe. I need 12

The Sash Carrier Assembly was broken, and the metal part dropped down. I suggest it is similar to on lower sash.

I need to get the same balances as shown in the pictures above, 10 balances for 27c and 26 balances for 27b. The shoe is closed at the back and says "PAT 4610108" on it. And at the top there is a metal hook

30”, 9/16 wide. It looks like a hook on the end

That's all the numbers I can found on it.

I need a replacement 26" channel balance for a Pella Impervia fiberglass double hung window. The stamping is 26C BSI . The shoe is 1" wide and slightly under 5/8" thick. The mount is a hook. The internals is a combo spring/block/tackle Do you sell it? If so, how much and how long wait time? ... (cont.)

Looking for a replacement for a channel balance. It is 28" length, 9/16" width, and 1/2" depth. The hook is on the top. Stamped 28C. It needs to work with a 1" pivot lock shoe such as 15-194.

Need custom end attachment 15-198 S795-26 option: 26C.

Hi, I have a customer that has a broken rope on their window balance and they claim it is a Hurd Window but my guys could not find anything on the windows mentioning a brand name. Can you tell by these pictures if you would have a replacement balance for these? Thank you!

I need a few 795 channel balances with a hook instead of screw attachment Thank you.

Hello I am in need of two block and tackle track assembly parts. Basically everything that you see in these photos. It looks like the number on the side of the track is 16 C which I'm assuming is 16 inches of metal track. hope you can help me with this. Thanks. Kory

I am looking for channel balance and pivot bar for several MW windows. See attached. Thanks! John