Viewing all customer Discussions for:

38-139 Roto Multi-Point Lock, 37MM Fork

Egress window latch is missing. Broke off. This is a 4200 series window with crank to open. Latch must be engaged to open and engaged when closed to lock shut. I need the replacement?

One of my windows cranks but it doesn?t actually close. I can pull the window closed but the gear inside or something is broken, I need a new one.Another window I have had the lock handle break off. The pictures are of non broken pieces. The picture of the crank handle is the correct side but two ... (cont.)

I need help locating the latch for this awning window. Can you help me out I attached some pictures. Please let me know if you can help. Thanks Steve B.

Hi: Thought I'd identified this as your #38-095, but after measuring again, I'm not sure. Mounting holes are definitely 3 7/8" spacing. Thanks in advance for your help! Pete

Do you have a window latch for this Vetter casement window? It was installed in 2004.Thanks, Jim

Around fifteen years old.

I have a window multi-point lock broken, could you please help identify the part and let me know the related cost?

This window is in our master bedroom upstairs and it doesn't open. The lock is broken on the side. Where can I buy and replace a new lock instead of having to change the entire window case? Our local window store suggested replacing entire window case which they quoted at $1100! Seems like this can ... (cont.)

I need a replacement part for a Mercer window. It is a right hand lock for a basement egress window. The kind with a crank to open and close it.Thank you.Anet

Ordered the 38-138 however the design is slightly different therefore does not really fit. please see the attached picture. Let me know if you have another version that could be closer from my existing one (the one at the bottom is the one I am trying to replace)

We are missing two of the locking mechanism on side of crank bedroom windows.

Hello, the locking assembly broke on my window, Im not sure what part I should replace it with, but in my research, I found 38-099, 38-091 and 38-58L, and I also need it in beige. I haven't removed any hardware, as Im not very handy and dont want to break it more -I will have my handyman install the ... (cont.)

Hi. I believe the manufacturer of a window for which I need a replacement part is Philips. House was built in the year 2000. Basically, I need to replace the latch mechanism, because the threads for the mounting screws have gotten stripped. Do you sell a replacement for the latch mechanism (shown ... (cont.)

Hello, please help me identify this part to fix my casement window. I tried browsing your parts, but couldn't find something that matched exact dimension. Outer dimension is 4.25" long, and the inner part is 3-15/16". It seems standard, but having trouble locating. Thank you! In dire need of fr ... (cont.)

Looking to replace this broken latch, you can see the hole where it goes in the window.Thanks for your help.Best,Kevin

I don't know model or anything. We need 3 of these latches. Can you help?

I can find a name on the window. "Truth 31272" is stamped on the hinging arm that opens the window. The handle broke off when locking the window and I'm trying to determine if I can but a replacement unit.

Hi the latch broke on my window. I have attached a few photos of the good side and broke side. Hopefully, you have the replacement part.

Those are the different parts of the lock.

2246