Viewing all customer Discussions for:

26-378 3" Pivot Bar

my pivot bars that I am looking for are 2 1/2 inches long. They are tapered down at the very last 1/4 of an inch.. they are 5/16 of an inch wide down the body of it and 3/16 of an inch thick . The first hole from the top end of it, which I am referring to the T at the top is 1 3/16 of an inch to the ... (cont.)

Will this pivot bar work for a spells Envompass window- it looks very similar? are there secrets to Replacing? Thanks Tim

Hi I have a 15 year old Simonton windows broken pcs I need recommended parts thank you

Any help with these would be greatly appreciated.

Hello, I am getting very frustrated due to Simonton. I have a customer who needs Single Hung balancers swapped out in one window. Never did it before for this window, but feel I could if I have instructions. I do not have cam measurements, but new cams are needed, 2 pivot pins and balances for l ... (cont.)

Need this part.

Need double hang window accessories

What I'm missing is Four items: 1) upper nylon block (this holds item 2). this block screwed into exterior of window jamb. 2) metal spring that assist raising window. 3)lower nylon block that slides up and down. It also will hold item 4 when you set it in. 4) Metal (seems like weak almost lead) "T ... (cont.)

We need peice that is screwed to the window about three inches long with 2 screw holes.

Hi, I attached 2 photos of the window tilts we have. We broke the pivot bar on the right side and found you have on your site: 3" Pivot Bar Product Code: 26-378. We also broke the right side Balance Shoe I think it's called. I can't perfectly match that on your site so I sent a picture of the lef ... (cont.)

A rep who now are the contact for our Simonton Luminess 400 series windows provided the following. Our current local window contractor/company stated we needed a new "balance shoe" for a double-hung window.'The part number or balance sizes you need are 3.5 Omega and 5.5 Omega balances. They are for ... (cont.)

Hi, I need a pair of Balance Coils for a 13 year old BF Rich Vinyl window. Do you have a replacement part for these, as I know BF Rich is out of business? Thank You, Mike

I think the pivot bar is 26241 not sure which shoe cam it is. It's for appleby double hung tilt in windows from 2005.

The only identifier, after removing the hardware, is #5.5 37 inchs PAT 5232208 on the coil. I need all the proper hardware to replace all coil balances on both sides of the window, the pivot shoes, and coil supports. not sure if this setup is considered single coil, double coil, or more. Note that ... (cont.)

Need to new spring kitsFound sticker for order on sashHave multiple windows with bad balances and some of the internal holders in the bottom of the sash that go into the balance.

Screw pulled out of coil spring crashing it to bottom of the window. It isA Simonton Brickmold 300 single hung installed in 2016. Double spring, #6.0 35. Window weighs 24.5 pounds. Took pictures to help you ID the parts I need. Let me know if you need any more info.Thanks Rich

I have 4 Simonton windows in desperate need of repair. These pictures show some of the damage on 3 of them. If side doesn't matter I need 9 (4 left, and 5 right) balance assemblies. I also need 2 pivot bars. I think I found the 3 left, and 2 right tilt latches that I need. They're in my cart. ... (cont.)

Hi. This is my window balancer. So I don't now what kind I need . Thanks . D.

Broken guides and springs on both sides along with lock jam ? tabs.

The window size is 28 wide by 29 high. The coil and pin broke. There is no marking on the coil to tell me what weight it is.