Viewing all customer Discussions for:

26-378 3" Pivot Bar

What I'm missing is Four items: 1) upper nylon block (this holds item 2). this block screwed into exterior of window jamb. 2) metal spring that assist raising window. 3)lower nylon block that slides up and down. It also will hold item 4 when you set it in. 4) Metal (seems like weak almost lead) "T ... (cont.)

We need peice that is screwed to the window about three inches long with 2 screw holes.

Hi, I attached 2 photos of the window tilts we have. We broke the pivot bar on the right side and found you have on your site: 3" Pivot Bar Product Code: 26-378. We also broke the right side Balance Shoe I think it's called. I can't perfectly match that on your site so I sent a picture of the lef ... (cont.)

A rep who now are the contact for our Simonton Luminess 400 series windows provided the following. Our current local window contractor/company stated we needed a new "balance shoe" for a double-hung window.'The part number or balance sizes you need are 3.5 Omega and 5.5 Omega balances. They are for ... (cont.)

Hi, I need a pair of Balance Coils for a 13 year old BF Rich Vinyl window. Do you have a replacement part for these, as I know BF Rich is out of business? Thank You, Mike

I think the pivot bar is 26241 not sure which shoe cam it is. It's for appleby double hung tilt in windows from 2005.

The only identifier, after removing the hardware, is #5.5 37 inchs PAT 5232208 on the coil. I need all the proper hardware to replace all coil balances on both sides of the window, the pivot shoes, and coil supports. not sure if this setup is considered single coil, double coil, or more. Note that ... (cont.)

Need to new spring kitsFound sticker for order on sashHave multiple windows with bad balances and some of the internal holders in the bottom of the sash that go into the balance.

Screw pulled out of coil spring crashing it to bottom of the window. It isA Simonton Brickmold 300 single hung installed in 2016. Double spring, #6.0 35. Window weighs 24.5 pounds. Took pictures to help you ID the parts I need. Let me know if you need any more info.Thanks Rich

I have 4 Simonton windows in desperate need of repair. These pictures show some of the damage on 3 of them. If side doesn't matter I need 9 (4 left, and 5 right) balance assemblies. I also need 2 pivot bars. I think I found the 3 left, and 2 right tilt latches that I need. They're in my cart. ... (cont.)

Hi. This is my window balancer. So I don't now what kind I need . Thanks . D.

Broken guides and springs on both sides along with lock jam ? tabs.

The window size is 28 wide by 29 high. The coil and pin broke. There is no marking on the coil to tell me what weight it is.

I would like to buy replacement T pivots and balance assembly for this model Simonton window. What are the part # that I need?

Simonton Double Hung Window parts needed- Model H-LC50. Size 36 x 74 Need 1/2 Balance set with plastic cover Balance shoe Two hole pivot bar

holes are 2" from end of "T" and 1 1/4" from end of "T" Pin is 5/16 x 3/16 inch

I found the pin goes from window to Pivot Locking Shoe, broken !! Is this something I can order from you guys?? Check the attached pictures please

Please help in finding the pivot bar in attached photo. Also included is the window manufacturer sticker just in case. Thanks,

I need to replace pivot bars for simington double hung windows. I need 6 bars. Photos with measurements included.

I need a replacement for my window as the one pictured I upload snapped. Thank you! Tamra