Viewing all customer Discussions for:

S385-23 23" Series 385 Channel Balance

For a window that foes not tilt, measures 23 7/8 not including the nylons

Looking for replacement channel balances. Was looking at the Series 385, however, the weight of my window is 42 lbs, which is higher than the stamp options listed on the website. I am looking for a quantity of (2). Thank you!

I need two (2) replacement channel balances. They are off single-hung Champion vinyl window. Movable window is about 3x3 (feet).Channel looks to be 5/8" (outside to outside)I have purchased from you before and had good luck.ThanksMatthew

I have a balancer printed with: "22 3 HO Caldwell" I measured it tip to plastic tip and it is 24", I haven't weighted the sash but 30lbs could be correct. Thanks!

Replacement springs

I'm having difficulty determining if the chanel balance I need to order is the the 380 or 385 series. With the pictures I've provided can you please help determine which part I need. I can provide additional photos if needed. thank you advance for your help. Deanna

Hello, We are looking to replace the channel balances for a window. The are Nu-Air windows. The channel balance is marked 22 5 CW CMC 10.Thank you!Marcy

I need 8 of these they are 22" in length

5/8 Caldwell 22-4 Single hung window balance

We are in need of 4 window balances. Two 23 inch part number 22 5 AW CMC 2 we also need 2 of the 31 inches, but the number and words on the channel are hard to see, It looks like 25 KW CMC 11.

Need two replacement channel balances. They are identified as 2290 followed by 33. Heel to toe measurement is 1 3/32 and length of metal channel is 27 inches. Sash weight is 31.5 lbs. Your recommended replacement please. See photos. Joe

The metal channel is 1/2" wide and 22 7/8" long with 22 4 CP CALDWELl stamped on it. I need 4 this size. I believe the manufacturer is Insulate Industries. I also need 8 of the same balance spring with 24 3 HP CALDWELL Stamped on them. Thank you!

Sash size 25 5/8 h x 45 1/2 w x 1 3/8 t

II measures about 23 in long i need two. The end of one picture is broken. I need

Hello, I believe these are 380 Channel Balances based on the previous ones I bought.However the lenght of the aluminium part is 23", not 24".I've double checked.Is it possible to get 23" channels with 380 fittings?Thank you,Foster

Hello - I'm looking for replacement channel balances. The broken ones are stamped with markings 22 C - it's a 23" (l) x 9/16 (w) (without the nylon fittings) and were installed in a window brand called Mildoor, Miami, FL around 1984 - 85; photos are attached. Thx - David

Hi,Yesterday I had an inquiry and your answer was perfect. I already have the items in my shopping cart, thank you.But before placing the order I saw that I have 2 windows that are not closing until the end, I mean, when it's fully closed it is not enough to lock it. I see the balance is a little ... (cont.)

I need to replace these window balancers. I need:(6) with the numbers 28 5 inscribed, 29"(4) with the numbers 28 3 inscribed, 29"(2) with the numbers 22 3 inscribed, 23"All of them have the same end piecesThanks for the helpGreg

? 22-9hb5cmc left side of impact window. I need one. Can you help? This is in my home.

Hi, The window channel holders needs to be replaced for the windows. Please help in choosing the correct replacement parts. thanks Mahantesh