Viewing all customer Discussions for:

S385-23 23" Series 385 Channel Balance

Trying to identify what balance I need

Metal part is 24 inches long. Marking: 22 3 D0 Caldwell Please help me identify the correct replacement part. I ordered S380-22 Option 2130, but it's about one inch too short. Thank you!

Item measures 1/2 by 23 inches (metal part) Is marked with 22 3 LR Caldwell. Came off an Insulate brand single hung window. Pulley cord is toast. Thanks.

Need to replace the pictured balance. It says "2230" on the side.

Please see attached pictures and let me know what replacement channel and what strength to order

3 photos: Markings on balancer Photos of clips and end fittings.

Printed 22 2 K5 Caldwell Thanks much

Need to replace window balances, my existing is stamped with 22E USB See pictures The length of the metal piece is 23", the width looks like 1/2" each end has plastic guides. The spring, cord and internal parts all came off. HElLP! Thanks

23" channel length. 9/16" wide. Need to replace 4 total due to break and loss if tension to hold window up.

Plastic parts have broken down. Would like prices for the 2 clips attached to the window itself and replacement balances. This window is from a screen porch door. Thank You Nicholas

These are from a Philips vinyl non tilting window. The window measures 28w by 52" high. The balance is 24" overall length and 1/2" wide. It is marked "22 3 Caldwell FM"

Window channel balance with spring and pulley. The metal is 23 inches and the overall length is 24 inches. It has two plastic ends and a little metal hook on the spring side. It says "22 4 BO CALDWELL" inscribed on the metal. My husband says he thinks the metal is 9/16 wide. Anyway... we need replac ... (cont.)

23 inches long 1/2 inch width 22B USB marking on the side

I want to replace top sash guide for S385-23 Channel balance

The channel is 23" long and 1/2" wide. The shoe is 1-3/32". There is no stamped serial number other than the Caldwell one shown in the subject.

Not sure what make the window is. The spring stopped recoiling on one side. I will replace both. However I'm not sure which part to purchase. Thank you.

Piece is 23" long. I am also missing the metal piece at the top of the window which tilts out with flat head screwdriver

stamp on original shows : 22 cj AF.Trying to figure out correct replacement unit for weight of sashjeld-wen window, single hung, 36 x 54.looking at new channel balances, series 385, 23"Will they work for me?

Hi, I was trying to find a correct match for my window balance/channels. I have a few that say 25-9 and a few that say 24-9; all for the same size windows. On the 25-9 balances, the plastic top part was cut at the top, so it would fit. I do think the 24-9 is correct; bi can not find a match in yo ... (cont.)

Good afternoon, I'm having trouble. Just the aluminum channel measures 23 inches and 1/2 inch wide. However I can't see a difference between the plastic Top/Bottom on your series S380, S385, or S395. Sure could use your assistance. Thank you! Oliver