Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

i need on replacement rail for the side of the window.

Hello, I'm hoping you can identify this channel balance for me and I may order a replacement. Thank you.

Hello, I'm kind of confused. The balance has a stamp # 26-4. The length is 27" and the top and bottom taps are winged. Can you direct me to the correct balance? Thanks.

Need to replace two of my windows - need 4 rods and I believe they're 26in. Please take a look and let me know. Thank you in advance

I have Milgard windows and several of the balances have failed. The number on tha balance is 26-4 KX CMC 7. The shoe and top have wings 15/16 of an inch wide. The shoe's depth is is 1 1/16" or 1 3/32". I am hoping you can help me find a replacement balance for these windows. Please let me know ... (cont.)

Looking to replace this balance

Hi I was wondering what part I should buy from your website The number id I have is 26-4 LX CMC 11

See pictures. Metal part is 27" long. Thanks.

Please advise which part number would be the replacement for the attached photo/description. Thanks

Hi, my old channel balance does not have a number on it. Which would be the correct replacement part?

Hello,My broken window balancer is 27 inches long, has markings "26 4 HV CMC 2", is from a Milgard window.Thanks,Mike

On the part it is stamped with 26 4 JP Caldwell Please help me to identify the part number. Thank you

The attached files show the balancer I wish to replace. It is stamped 26 4 HS Caldwell and the metal channel is 27 inches long. Let me know if you need any additional pictures to determine the correct replacement. Thank you, Ed

I need replacements for milgard window balances. Steel part is 27" depth is 10/16" and width is 9/16". Have attached pictures. I see a post on your site for someone else that had same model number, 26 5 GW CMC 4, but the recommended replacement didn't match the measurements on my balance. Any he ... (cont.)

I had the string snap on the other side. Looking to get replacements for both.

I need 2 of these to replace the one that broke. I ordered from Amazon but came with the wrong ends. Can you help me out

I have sent an email to help@swisco.com and attached photos here and there. The old channel is 27 long, the walls of the channel are 1/2" wide. The hardware at the ends are a little bit beefier than the balancers that I ordered. The email is long...

I'm looking to replace a 27 inch with the markings 26b. Thank you.

Hello, I need help with identification. It's marked as 26-4 Caldwell LL and measures 27" from metal to metal. There are wings on both top and bottom guides. I believe these could be a match for the 380 or 385 series, however when I measure the foot depth, I seem to be right in between 1" and 1-3/32" ... (cont.)

Hi one of our Windows does not have window balancers at all so we need to replace those missing completely