Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

milguard 2660gg tsb rolled edge 27" shaft 9/16 wide ,sorry about bad pictures

Hello, I need to order a S385-27 and it asks me to chose a from a list of options, and I am not sure how to determine which option I need. Can someone help? Thanks! Chris

I need a replacement spring counterbalance for a double pane window that is 45 1/2" Wide by 29 1/2" high. From the old/broken one I need a 27" series 385 with 19-005 top and 15-004 shoe. However I don't know the weight of the sash. It turns out one of the takeout clips is missing and I'm hesitan ... (cont.)

Need a replacement for 26 4 DW CMC 11? The length is 27". I think it's a S385-27, but don't know the weight?

The metal portion of the balance is 27" long and 1/2" wide. The top is 15/16" wide (back spring side), 9/16" wide (front solid/printed side) and 3/4" deep. The bottom shoe is 15/16" wide (back spring side), 9/16" wide (front solid/printed side) and 1 & 1/16" deep. The window is hard to ... (cont.)

28" in length from tip to tip 1/2" width Markings: 26 4 FT CMC 4

I need a couple of replacement channel balances and want to find the appropriate matching part and get a price. The stamped numbers/letters, which don't seem to correspond to your system, are: 26 9 KV CMC 2. The window (lower sash, metal frame, double glazed) is approx. 46" wide x 29" high x 1-5/16" ... (cont.)

Hi there, I have a few windows made by Phillips Stayton with the balancers brocken. THe blancer code as you can see in the picture is 26 9 but I doubt there are correctly choosen. Please recommend the corect spring tension for the 35Lb sashes. I want to mention also that the window is very thic ... (cont.)

I ordered 8 of these and they are exactly the right configuration and size etc. But when I put them in they break. Am I doing something wrong? The string pulls out and one of the wheels breaks. It seems quite tight to pull the window down. Is there a way to break in the springs? The tension I ... (cont.)

The cord inside one of our channels broke. I would like to purchase replacement channel assemblies. The enclosed image hopefully supplies sufficient info to enable identification. I will supply additional photos and/or measurements if needed. Thank you

it is 5/8" wide by 1 1/2" long by 3/8" tall. As you can see from the picture that the to stop is broke. I looked through your parts and didn't see a match. This is off a milgard vinyl window. I'm going to order the S385-27 balance if this helps. Thanks Keith

I have a balance with markings 26 DS 45 PT BSI. The metal channel measures 27" by 9/16". The window measures 27" tall by 50" wide and is very heavy, Maimi-Dade code hurricane impact version. It has 2 springs, one inside the other, looks like your 385 series. Any chance you can match it? Thanks. M ... (cont.)

I need to replace two channel balances. Both are labeled 26 4 FP Caldwell. They are 27 inches long. Pictures of the plastic attachments are attached. Thank you for the helpful video on how to remove the channel balance.

I think mine are either style 380 or 385. The number stamped on the side is 2690 and I did not see that listed..... will need for 3 or 4 windows..... thanks Otto

Metal part is 27.00 inches long; Markings on part are "26 3 CALDWELL HM" Part looks like Series 385 Channel Balance, but I am not 100% sure. Hope you can identify it by the markings provided -- else I can send you a pix.

I need one replacement channel balance for a non-tilt Milgard brand window. The right channel balance (oriented from inside the house) is broken, the left channel balance is working. The marking on the broken channel balance reads "26-4 BA CMC 11," while the marking on the functional channel balance ... (cont.)

The number stamped on the part is 26 4 BSI PO (also included in an attached image. The channel length is 27 inches, width 9/16 (1/2) and opposite width is 5/8. I am interested in purchasing a replacement channel and one take out clip.

Hi, I have identified my balance - 27" Series 385 Channel Balance Product Code: S385-27, but I am not able to weigh the window. Stamped on the old unit is- "26 5 EW CMC 11" Is it critical to know the exact weight? I am guessing around 20 lbs. Thanks,Larry

Looking for compatible replacement for Channel Balance: 26 5 FW CMC 0 ,(window manufacturer unknown.) Length 27" x Width 1/2" x Depth 9/16".

I am looking to replace a window sash balance. Based on other posts I have seen, I tried to round up as much info as I could before posting. I believe that I need a 'S385-27 2660', but I wanted to check with the pros first. My window is 46 1/16" wide by 29 13/16" tall. It is a single hung non- ... (cont.)