Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

Hello, Please ID the sash balancer for this window type.

Hi I need these for 4 windows please. For Milgard Windows

Was hoping I could get a specification on what model I should be ordering. Chanel length is 27 inches

Hi there, my window sash balance stamps are different.One is 2640cj BX and another one is 2660 BJ as show on the picture.andMetal length is 27". Top and bottom are winged. Bottom guild are broken.Thank you.

The length of the metal channel is 27" It is marked '26-3 JQ CALDWELL' I'm uncertain about the depth and the width. The depth is 9/16" The width of the narrow side is 1/2" The width of the wide side is 19/32" Both top and bottom are winged.

Need replacement channel balance part# 26-4-CV=CMC-1

I need new channel balances for my windows .5 inch wide 27 inches long (metal only). Please see attached pics, I made composit images since this tool limits to 5 images. text printed on the side: 26 4 AP CALDWELLPlease, let me know if you need to know anything else to match them. Thanks! ... (cont.)

I need at least 10 of these channels. The marking for the window is H-LC30-48x78 Series: 6210/6230/6230J/6270 AAMA/NWWDA101/I.S.2-97. The marking on the channel is 26 4 EW CMC 10. They are 1/2W x 5/8"D x 27" long. Attached are some photos. Please provide pricing

metal not including clips is 27 inches, 3/8 thick, can you help idenitfy this so I can order on your website for window that slides up and down, no tilt.

HI, I am looking for replacement channel body parts for my window. see attached photos. The channel is 26inches long (just the channel, not including the plastic guides) and about 1/2" wide. The part is printed with 26 4 HV CMC 7. This is an older aluminum window. thank you for your help in loc ... (cont.)

Hello Looking to replace the channel balancer on our windows and need to Identify...please se attached photos and the metal channel lenght is 27" Thanks Leo Johnson

From webpage - I think I may need a 37" series 378 channel balance with option 3640. But, I am not sure that is the right one. Windows are 30 years old, then damaged channel has marks 26.4 KN CALDWELL snf id 1/2 wide (see photo). the one of other side of window has mark 26.3 CALDWELL LM. They appear ... (cont.)

It says 26 3 at the bottom.

Just want to make sure I order the correct parts Need 4x 26-4 and 2x 20-3 Thanks.....Bruce M

I need to purchase balances for a large hurricane impact window in Florida. The current balance is marked "2850 BSI BvThe length is 29"width of plastic end bit is just over 1"

However I have 4 windows all the same. I took apart two window's, one had 2630 and the other 2640 . I also do not inderstand the lenght. According to some vedios the lenght of the balncer should be below the top enjection clip. These are 3" above the clip The lenght of the metal is 27? They seem to ... (cont.)

I am trying to replace a channel balance, but I do not know which series it is. The stamped number on the metal channel is 2620, but I have no idea which series it belongs to. I also need the clips that attach to the window.

27" long per your instruction video ( not including plastic end pieces. 2640 stamped into metal rail.

26 lb 27 inch long 1/2 inch wide

I need repalcing 2 channel balance for the window, I have old one from which Im sending you a photos. I only messured the metal part and you can see its 27" Thank you Marcel