Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

HELLO THE WEIGHT OF THE JELD-WEN TILT SINGLE HUNG IS 16 LBS THE WIDTH OF THE T-BAR IS 1 1/4 INCHES THE LENGTH OF THE T-BAR IS 1 1/2 INCHES THE LONG BAR IS 23 INCHES THE BALANCE IN THE PICTURES IS ONE THAT WAS REMOVED AND IS STILL WORKING. THERE ARE A TOTAL OF THREE WINDOWS (TWO WINDOW ... (cont.)

I need a window sash pivot matching the one posted, one sash lock matching the one posted and two shoes matching those posted. Thank you. I also need guidance on installing the shoes and getting the old ones out.

Could you please help me locate those two parts.

I don't know the manufacturer of our windows and have ordered the wrong part before. Can you help by looking at this picture. Thanks.

I have a broken T-Pivot on my Sliding upward windows. Need. to replace 4 of them. Marked with "23410"

As arranged during today's telephone conversation, I am attaching pictures of balances and pivot shoe that I need. I need six (6) 22" long 9/16" wide balances, and four (4) 28" long 9/16" wide balances. Also I need 10 pivot shoes - when I am measuring the pivot shoes. I get dimensions: 2" long, 1" ... (cont.)

do u still stock metal piece for slide window

Balances are 30 inches

I'm looking for Window balancers that will fit this style along with the pins that sit inside the bottom of the window itself.

I believe this is from graef window

Please see attached pictures I need a replacement partI found this below link which recommends S795-36 and 15-194 https://www.swisco.com/discussions/Replacing-Window-Channel-Balance-77-100663Added more pictures

1 inch wide 1 5/8 tall 9/16 thick Keith

Please advise if you have this pivot shoe

Hi, I believe you have replacement parts for this old block and tackle balance. This is a single hung window, about 39" x 29" The metal clips at the bottom of the window are 2 1/2 " long. One has a 4 on it and one has a 5 on it.The rod unit is over all 27" long.The black piece at the bottom of the r ... (cont.)

Good morning can you please help me find the correct pivot lock on your website or maybe option B.Thanks Tibor

Looking for replacement balance. 15". Would need 4 for a double hung tilt window

I am looking for replacement pivot shoes, pivot bars and balances for an earthwise window. The pivot shoe is 1/2" thick, 1-3/16" wide and 1-3/8" tall. The pivot bar is 2-1/2" long. The balance is 12" long. Can you assist me in identifying appropriate replacement parts?

I just ordered 4 replacement pivot bars. Above please find a photo of the bar that I need to replicate. My order is #1956247.Please use this photo to help confirm that the correct part has been chosen.Thank you.Elaine

Do You Have These Parts

one side is broken best we can do for a window label -