Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

. It a metal piece that locks a tilt window into the side slotBroken off. It screws into the bottom of the window and sticks out.Pivot Bar, 2-1/2"Product Code: 26-021 not sure of exact size. I am not sure of size. I think more than 2"

I am trying to replace a window shoe but can't do cut out method it is metal, need help with a cheap alternative to jam spreader. Also need new foots for the windows and identifying which ones I need. The one broke off inside and can't get out, but while trying it got pushed in and seems to be out o ... (cont.)

require to purchase 4 items

Hello again thanks for helping us out and we do not need the balancer no more we found a couple of them but we do need the offset pivot arms here's a picture of the original it's a little bent and here's the one we found close to on your website where we're not sure if it's exactly yet hope you can ... (cont.)

I have older windows that the salt air may have shortened some parts life. The pivot bars rotted out and some of the balances broke down. I am looking for replacement parts. I did find a label with a scan bar see pics and please email or callTim

Hi hope you can help me with this as you've done so many times in the past. This balance is 26" long. Serial number on it says 26D. The hook up top of the balance clicks into the jamb on the very top and this pivot shoe somehow is connected to the bottom of the balance. Pivot shoe is approximately 2 ... (cont.)

This pivot bar is about 3 inch's long. The "t" shape is 7/16 wide The first screw hole is 1 6/16 back. Do you carry anything compatible?

I need tilt sash pivot bar for AAPC window I need 4 of them

Hi, I can't find these L shaped bars and wanted to know if I could just use straight bars instead.

I need 20 265A I bought what I thought might work the 256d is close but the holes are off. Three of them are closeCan you please help me with this.Thanks Dan

Need one of these. It looks like the two screw holes that are used are 3/4" apart (at 1 1/4" and at 2").

The etching on the glass shows EAGLE, low-e4 272, igcc/igma, Nfrwc ewd-n-076, cig3.1 2-08. The shoe and pin are broken on both sides. I have included pics from a window of the same size that are not broken to show you the parts that are needed for reference.

Hello, can you please let me know if you have pivot bars for - Thermastar by PELLA (Lowes). I have attached some photos, these pivot bars simply slide into a groove at the bottom of the window sash. The windows are vinyl double hung. Please let me know if you need to see photos of the bottom of the ... (cont.)

The attached part broke when taking my window out of the slide track. Do you have a replacement. ThanksGuy

Looking for replacement of the part in attached picI also need window balances to match attached picture (31")

I need the 4 pivot bars in the picture above. 2-1/2 inches long 3/8 wide. l shape. first hole is 3/4 second hole is 1 7/8 from end cannot find one on website

Could you please help me find this part? I could not find an exact match on the website. I bought it from North Atlantic Corp. in Somerset Massachusetts? They said it might be a United brand. I need 2

We have Plygem windows from about 2012. A few years ago the windows were tilted out without the window being lifted and parts broke. One of the smaller windows stills has a 3700 sticker series. But the windows I am interested in are slightly bigger but bought at the same time. I have also found atta ... (cont.)

Hi, I have 7 windows in my house that do not stay open. The house is 24 years old. Only one balance is still together. I took it out of window, see attached photos. The only marks on it is "PAT. PEND." Top to bottom it is almost 29" and the part that was attached to the window is 1 3/8" wide. The wi ... (cont.)

Balance is 32" long Has a hook at the top and a balance shoe at the bottom. It looks like a 15-194 it measured closet to that picture. Pivot bar looks like 26-021 matches dementions pretty good. Balance bar looks like 15-194. Help!! I did the best I could but remember" everything I told you may b ... (cont.)