Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

I have a pivot window Soft Lite brand name. The housing is broke (you can see a crack) as well as the pivot bar is broken. Please provide a quote for these part. Thank you.

I need window balancers and shoes and pivot pins.

Hi, I am trying to replace a broken pivot shoe. All measurements lead me to believe that it should be replaced with the 15-046 pivot shoe that you sell. The only difference is the 15-046 has a white cam and mine is light blue. I haven't taken a micrometer to to it, but the thickness is slightly over ... (cont.)

replacrment for 832 springs and holders for certainteed windows

Hi, our double hung window is not staying open. below are pics for tensioner shoe and latch. Would you be able to identify parts for us. Thanks.

Realized I could take the metal piece out. See pictures Part is 2 1/2" long. First hole is 1 3/8" from working end. Second hole is 2 9/16" from the end. It's 5/16" wide and 3/16" tall.

I found the metal tabs that protrude from the sides of the windows are rusted away. I need the metal tabs to replace them and the blocks that they go into in the window frame. Thanks

Hi. I am looking for a weathercraft replacement window pivet. U shape channel. Thank you very much.

Please help in trying to determine if you have something to replace my broken pivots. The 26-373 or 404 look to be close but mine are plastic/ ceramic? I don't know the brand of windows, there are no markings or numbers visible. All vinyl

I need a steel spiral balance pivot where the spiral balance is blue tip and 3/8 in. The pivot itself is 1/4" wide, 3/16" tall, and 2 inches long. The balance pivot fits into a red plastic insert when reinstalling the lower sash.

I'm so glad I found your website! You'll find my pictures attached. It is an Andrusko double hung window (from Unicorp). On the window it also says "DS LowE TI BtrWHT Cont 6 Lite Btm" if that means anything to you! Please let me know if you carry the balance I need.The other thing you'll see from my ... (cont.)

Need case and bar

I recently had order pivot bars they will not work I am sending pictures of what I need. I can not take window out the ones I ordered would work if the were just straight cut off on the end The ones I ordered are#26-378 they would work without the T at the endRebecca

I have Phillip windows single hung I ordered #26-378 3" did not work can you tell me what will?

Hello, I am looking for the part number for this window pivot pin. As you can see from the pictures the dimensions are: length = 3 inches width = 5/16" height = 1/4"

Hello, I am looking for the replacement pivot bars in the picture above. I will require 2. I also included a photo of the lock shoe for reference. All other equipment for the window is functional. Thank you for you help!

need to identify correct pivot bar and shoe replacements. I am a full time skilled handyman with a few prior replacements of this nature. see attached photos thanks

2" pivot bar with one hole. Pivot lock shoe and window tilt latches. Built in 1997

Greetings, I have a project to replace sliding mechanism in my 1996 built house. There is a plastic pivot bracket, or shoe, that holds steel piece of the window bottom. It also holds twisted spring that is embedded in metal tube and slides in it up and down. Some of the pivot shoes broke and some of ... (cont.)

Can you help me identify the parts on these older double hung vinyl replacement windows? Please review the attached pictures the spiral balance has a red tip and the metal tube section is 22 inches long. They will need to be replaced as well. I don't yet have a full quantity of windows, but it' ... (cont.)