Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

I need replacement window hardware for a Gorell G5155 windows. Window sash retention pin and screw as show in IMG_2292.jpeg Appears to be galvanized square pin with CRS stamped in pin.

I have a astra 2000 vinyl window and the bottom hinge broke off SEE ATTACHed do you have this part photo is the part I need #2 broke off The part # it goes to is 530c /530cs

Do you have this shoe and metal pivot ? Do you ship to Canada? Thanks!

This is the broken piece not correct in length. The picture has my measurements but may not be exactI can buy more than one part to try if there is something close.The picture is of the part that broke off right at the frame. There are two screws in the other piece.

I need the little u shaft that is connected to the window and gos into the shoe

Looking for a few more parts for one window. So far I have found 2 of the parts I need. Still looking for the correct parts for: Window pivot bar (the part shown in image is from a different window as the originals are rusted away completely in the other window) Window pivot bar housing (8573 853-2 ... (cont.)

Hello, my window broke from this piece. I figured out it was the pivot shoe and the other piece that attaches the window. I also need to replace the locks. I included as many images as allowed. Thank you!

part that sits at the bottom of the windowm both sides 3 inch metal rod

I need about 8 of these and 16 pivot bars with each pivot bar about 2-1/2 inches in length. Can you help? I know its hard to determine measurements from photos but maybe you can send me in the right direction. Thanks. Bill

Hi, I have one window where the spring coil has broken and needs to be replaced. I have another window where the part at the bottom of the window has rusted out and cannot sit in the spring housing so that won't stay open either. I cannot remove this part even when i undo the screw at the bottom. It ... (cont.)

What is the difference between the 15-195, 15-195B and the 15-229 shoes? I see they have "open cam" and "closed cam" in their part descriptions, but what does that mean? I'm going to measure my old shoes (that are broken in my window frames) tonight and want to order new cams for all the windows in ... (cont.)

I am looking for four sets of spiral balancers with the appropriate parts to attach to the bottom of the window and slides.

I have the Acorn single hung aluminum window with spiral balance. Where and how does the sash attach to the pivot shoe? Your tutorial doesn't show this very well.

My channel balances are marked with 34D and look to match your product #5770-34. They screw in with one screw at the top. The shoes are also broken. I have included a photo from a non-broken one that's still in the channel as I am going to have to cut the channels to replace and didn't want to do ... (cont.)

I thought I bought he correct pivot shoe 5/8 thick. But after i replace 4 of them and tried to re hang the windows the pivot bar wont fit into the Pivot Shoe. Now i got 20 pivot shoes that wont work and a wide open window. Is there a different pivot shoe that will fit.If that little piece of plast ... (cont.)

Looks like the spring wore out. Windows are fairly old about 15 to 20 years. Was wondering g if you have a replacement part.

2 15/16 long 5/16 w 3/16 D Screw hole at 1' U SHAPE

Had a window in bedroom fogging up and had glass company change out the glass. After the glass was changed the window would not stay up. The Techs said the balances looked good, but thought balance was getting weak or the new glass installed was heaver than the original. Could not find any markin ... (cont.)

What one should I order?

Channel balance non-tilt: 28 windows = 56 of ea item MFG by: Seasonall Stamped: 29901 BSI 35; 29.5" long (the actual metal part) balance shoe: 1-1/4"x1-3/16"x1/2" no wings (may be 15-003?) balance top: 1-1/4"x1/2"x1/2" no wings (similar to 19-002 except has round groove) sash guide: 2"x 3/4" 1" to ... (cont.)