Viewing all customer Discussions for:

39-366 9-1/2" Single Arm Operator, SS Roller

I need to replace this crank as it seems to be stripped out and won't close the window. Thanks, Ron

My research has led me to 39-027E, and it's opposite, with new window channel things...as the closest I can get... I'll need 5 total, 4 right (I believe) and 1 left, with handles, and the channels for the window. Before I order, am I on the right track?

They're 3 holes and the track is parallel to the mounting.

part no. 7073b rours is stipped do you have a re-placement

Need to find a replacement: Brand: truth 45251 40050

I am in need of 3 left and 3 right of the cranks shown. The housing is 2-1/2" from front to back (I had a photo, but your system limited me to 5 uploads). Can you help me? Thanks.Russ

I have a home full of 1960s' Andersen casements....I need new roto-gear operators... existing hdwr. has a number #7073A...base is 3 3/4" wide, screwholes are 31/8" wide arm lever is 7 1/2"......can you help? thank you, John

Hello looking to replace the entire hardware for my window. I need the Operator, track, handle, latch both right and left sides. These windows likely go back a far 60's or 70's. can you please links where I find this hardware on your site?

I'm trying to replace an operator arm from an Anderson window. Part number 7073B. See photos. Andersen wants $191 for one arm.

The stamp on the metal is 7168-20

I have a truth brand crank assembly that's 9.5 single arm I need a replacement

I need to order a replacement window crank for my window. attached are pictures of the label on the window and the crank I need to order.

Windows opens but will not close. The crank often just spins. Need to replace crank/housing.

Hi. This kitchen crank window is at least 20 years old. I'd like replace the crank handle and base. The glass has a "Anderson 2-1" painted on the glass in sort of a white triangle. Please advise if you have a replacement kit for the hardware. Thank you.

This is a bay window that was installed in the 90s. The window is in good shape but the crank part has broken on one side.

Hello. I need 2 left hand operators and one right hand. On the under side of the operator it says "ROTO P4000 " . I CANT FIND THEM ANYWHERE. this is for a vinyl clad casement window. Vinyl inside and out I believe. They look like commercial windows almost. They also have a multi point locking mecha ... (cont.)

Hi, I need to replace the left and right handle. Mine have stripped off. Can you please let me know which one I need to reorder based on my pictures please?

The window cranks are stripped and will operate properly. The attached pictures are what type they are, they're the original builder windows. The arm is 8 inches long from the bend of the are to the end that connects to the underside of the window. Do you have a replacement for these? Do you need ad ... (cont.)

Hi,My kitchen window is Patriot Window (see the attached picture). Now the lock handle of the right panel (see the other photo) has fallen out, so I cannot unlock then open the right-side window. Could you please help me get the right parts to fix the problem?In the past, the company mailed me anoth ... (cont.)

Andersen crank casement replacement. Can't seem to find one that is comparable.