Viewing all customer Discussions for:

39-366 9-1/2" Single Arm Operator, SS Roller

Hello , I?m in a patriot home and need a replacement casement window crank. Can you please help with this ? I need one for the left window crank . The inside retangle housing is about 4 inches by 1 inch .This window does not open anymore so I have also included pictures of the right window crank . ... (cont.)

Hurd window casement. This picture is of the one next to it.

Hi, Looking for replacements for my Truth operators. Part B is 4" from the center of the hole that connects to the window pin to the center of the hinge, and (presumably) part A is approximately 5" from the center of the hinge to the center of the crank gear. The number "45251" is stamped on the ... (cont.)

Swisco, At the request of Tim Connelly I am forwarding the following for identification and replacement help. Windows are Anderson and not Pella as originally guessed. (I'm an Idiot) Right window is not functioning (crank just spins) and left window is stripped but opens with gentle assistance. St ... (cont.)

Hi, I'm trying to replace my window hinges but there isn't any part/model number on the hinge. I've added some photos with measurements. Thanks!

I think theses are Patriot windows but there is no markings. Anyway can u point me to the correct part?

Need a suggestion to replace this part-Truth 45251

Need help identifying the correct single arm replacement 9 1/2 inch for home built in 1996 Truth hardware Vetter windows

Is there any way to replace the nylon roller on these operators. Truth 45251

Can you tell us the measurement of the operator arm? This will allow our parts experts to better recommend replacement options.

My window crank is broken. Need to replace. Picture is of the item numbers and a photo of crank. Thanks. Lori B

Do you have this Anderson window crank and lock

We have a 1958 house full of casement windows with window operators that are wearing out. Unfortunately I haven't found any replacement parts. I've uploaded two photo's of the operator. The words Anderson and RH are on the bottom side. Due you have any replacement parts or can direct me to a locat ... (cont.)

Length of arm is 9 1/2 inches. Length of track is 13 3/4 inches.

Looking for three sets left and rights can you help thanks Sean

A. Photos show a LEFT hand operator (I'll probably need a RIGHT hand, also).B. Note the tip "glide" point on the arm is a "DISC'", not the more common rectangular "SHOE".C. No other markings or identifiers on the window frame, glass, etc. (really? couldn't stamp a Model# next to your company name ... (cont.)

Looking for a casement window operator. Looks like a Detroit 2320. Is this still available or is there something that will work? Thanks

Attached are photos of an Anderson 7073B R operator and 7047R latch. Appears the consensus is to use the Swisco 39-365/6 to replace the operator. Suggestions reg. the latch please? Needs to be in white finish ideally. Thank you.

This operator is similar to the 39-221 but I need stiff arm.

My question is can I remove the complete setup of the 7073B including the rail on the window and replace it all with something comparable??