Viewing all customer Discussions for:

19-041 Channel Balance Top, New Security

I have two sizes of window balances. 11" and 24".

I have Hurricane windows. 1) I need 6 1/2" non tilt Channel Balances that are 23" long, Part Numbers 2290 BSI RF 28. I am not sure of the strength. 2) I need 12 1/2" non tilt Channel Balances that are 16" long, Part Number 15DS BSI RL 23. I am not sure of the strength. 3) I need 18 Tops ... I believ ... (cont.)

Looking to replace the wide channel balances for 3 windows -also need replacements for 3 single hung windows security aluminum coastal 240 windows (window size 33 X 26) no pic of rod included for these windows- can you tell me the part numbers I need to order

I have looked through the stock offerings and do not find a match for my Traco Impact Windows. Thanks to correspondence that I found online between your firm and another customer who must have the same windows I found some part numbers for the top (19-041) and shoe (15-005) components. I checked th ... (cont.)

Hi, I need to replace 4 broken channel balances which seems to be custom made as I cannot find them in your catalog. Those channel are used for Traco single hung impact windows (no tilt) Metal channel lenght is 24 in. The top seems to be new security 19-041 Shoe seems to be 15-004 ... (cont.)

I need 6 balances and supporting hardware for 3 windows. The manuf. was Traco, 240 single hung, impact resistant NOA # 99-1028.06. The windows are approx. 44 1/2 wide by 33 1/2 inches long. Inside the window frame I saw the following 897832 9 COL LDHI. The stamp on the balance reads 31DS PJ 38. Coul ... (cont.)

We need to replace 6 spring balances in our IWC windows, but they are not supplying these any longer. Can you provide these that will be compatible and at what cost for 6 springs? The part numbers in the photos are for the original and also for replacement springs, both of which fit. However, if t ... (cont.)

Hi. I'm looking for about 10 window balance Draco 35DS 38 and the little bottom blue cap Thanks pat

This is a Traco window. The spring balance channel is 9/16 inch wide and 18 inches long. These are the markings on the side of the channel. 17DS 29 BSI VM If you need other photos to match up this part please let me know as soon as possible. Thank youl

I'm replacing my current channel balances which are showing their age. They are 1/2 inch wide and 16 inches long. I'm guessing your Series 377s will work, but wanted to make sure before ordering. The sashes weigh approximately 20 lbs. Do you concur? If not , which ones should I order? Than ... (cont.)

Dear Swissco, I am looking for 6 replacement 1/2 inch Balance Springs for hurricane impact windows with a balance sprint model number of 29-14 CB5 CMC (29HP44-45). Please let me know if you carry this model and the cost for 6. Also if you have instructions on how to replace a balance sprint on ... (cont.)

Its 32 1/4" long not including the missing plastic part on the end

This is from my window. It's width is 1/2" and it's length is 29". It has a stamp of "K 29-1" on it. I am looking for replacement.

Hello Swisco, I see through your discussion page that you can custom make dual spring channel balances. I have a Traco window and the balances need replaced, they are stamped (23DS 38 ) and the sash weight is approximately 38 lbs. The metal channel length are 24" long with the 19-041 tops and the 1 ... (cont.)

Please provide ID and quotation for 2 replacement spring balancers, complete with proper end caps for TRACO single hung window. Number marked on removed channel is 2950. Actual size of channel is 9/16 wide x 5/8 deep x 30 long. I also require replacement takeout clips. Thank you!! Mike ... (cont.)

30 inch metal- top and bottom ends I matched online S371-30 in my cart - is this correct?

Pictures included

Hi I have a Traco window with 23DS 38 stamped on the window balances. I cannot find the balances on your site. Can I order them? Or can I make them from parts? I would need everything new but the springs. The Top piece is 19-041 and the bottom shoe looks like 15-004. Thanks Rick

Looking for these in 33". Not sure if window weight. Can you tell by the number in the picture? I wasn't sure if any number were missing from it. Thanks

24" Traco 2390 3s1 ro 26