Viewing all customer Discussions for:

26-078 LH Top Tilt Latch, 2-5/16"

The latches pictured are 2 1/4" screw holes on center and 3 3/8" in total length. Do you have a replacement for these?

Hi there, I'm hoping you might be able to help me. As you'll see from the attached, I'm looking for the latch piece that allows the window to swing in and out vertically for cleaning (not the security lock). Sorry if I'm using the wrong terminology. It's from a Champion window, and may or ma ... (cont.)

Hello, Sure hope you can help with these. I have two types here. These are interchangeable and I don't see much use for what appears to be a locking mechanism on the broken one. 1.25 x 3.4 x 0.3 inches There is no marking on ether one that I can see, Thanks again. Brian

I have a latch that looks like part # 26-079 but my dimensions are 2 5/16" overall length with 1 13/16" screw holes. Any chance you might carry something like that? Thanks.

I need to order a few tilt window surface locks like the one in picture below. Which part should I order? The width is 1 and 7/16 BTW, I prefer a slide button like 26-078 rather than the button/hole like the existing one. I am guessing none of your parts fit exactly and 26-320 is the ... (cont.)

Hi, This is a Crystal, double hung window. Both pins/locks on the side of the windows broke. Do you have any replacements?

2 1/2 inches from hole to hole 3 1/2 inches long 1 1/4 inches wide left/right adjustable/reversible Writing on it says "tilt safe". No marking on the actual windows themselves The current guides have "reversible" directions. The springy things with the angle at the end can flip over and m ... (cont.)

I attach a print from www.amscousa.com who do not supply outside US showing sizes plus a photo of my existing part from my Ducana window. I was looking at parts 26-078 and 26-079 in white which might be suitable and less expensive than 26-188W. I need 6 of each of the nylon parts if you think they a ... (cont.)

Hello, I am trying to figure out between part#900-19869 and 900-19875 to order. No brand name on the windows. As you can see in the first picture where I took the latch out of the sach, the end of the latch (the arrow shape) part is broken and I don't have the exact measurement of that part (shown ... (cont.)

Hi, it seems that 26-078 and 26-079 tilt latches would replace the current ones I have. However, I am tired of them breaking all the time. The 26-188W seems to have the same exact dimensions but made of metal. Of to use 26-188W instead of 26-078?

I need to replace several tilt latches on my vinyl, double-hung windows. They measure 3 3/8" L x 1 1/4" W. And the distance between the screws is 2 5/16". Photo attached. Any suggestions would be greatly appreciated. Thanks!

Hi, I have a top tilt latch that I can't find on your website. It is 3.25 long and 2.25 between the screw holes and probably 13/16th from the center of one screw hole to the edge. It is 1 inch in width. The only identifying marks on it appear on the underside where I see P50 and P51. Do you kno ... (cont.)

I'm looking to replace these latches. I don't see an exact match on your site and i need help. I think the total length of the hardware is 3". Melanie

Does the 26-178 latch come in white?

I am looking to replace some external tilt latch locks. I am having a hard time finding the correct measurements. I have attached pictures for you to see. I have measured 3 1/4" across, 1" down, and 2 1/4" from screw hole to screw hole.