Viewing all customer Discussions for:

38-144 Primary Casement Sash Lock, Non-Handed

Hello, We have Semco casement windows and the white plastic in the sach lock broke.I just want to make sure I am ordering the right part.dimensions 7cm x 6cmattached is a pictureplease adviseKaren

I need window side lock. Please recommend the part. Screw holes are 2" apart. Thanks

The plastic cam breaks in the Semco Casement Windows installed in 1999. Need to replace sash lock or Plastic cam if available.

I need hinges and locks for 6 awning windows. The part that attaches to the frame is 12" and the part that attaches to the window is about 24". These windows are 40" x 60" wood aluminum clad. These hinges allow the window to open past horizontal, although that is not completely necessary. I woul ... (cont.)

Looking for 4 of these please

Trying to replace these, model number is on inside of the handle, thanks Eric.

Inside the latch is a picture of a house with truth underlined to right of house. To the left of the house is numbers 45189 with a 6 underneath. I also have a broken latch with a 45189 and a 3 underneath. There's a plate on underside with "21328A" engraved. That's same on both latches. I have ma ... (cont.)

HI We noticed all the keepers on tow casement windows are missing; evidently removed during painting and then lost. The crank indicted they are Hurd brand and are over 20 years old. I've shown the keeper latch in both the open and locked position. What do you recommend?

I have windows manufactured by a Canadian company, KML which was sold off to Anderson Windows about 10 years ago. Anderson no longer carries parts for these casement windows. I have several crank handle operators and locking mechanisms that have failed and I am looking for replacements. Can you o ... (cont.)

Hello-I'm looking for a replacement casement window lock for my wood Vetter Windows. The plastic mechanism that connects to the anchor has broken. It's the right window for a double window in my bedroom. If you can help, I'd be very grateful!

Hello, I have Caradco window latches attached. One goes to a 28" x 34" window, and the other goes to a 21" x 56" window. Both are crank out windows. These appear bronze in color, but your website has clay and bronze color that looks very similar.

I have the 38-144 lock and then the secondary one on top. How do these work without the little pin that goes into the bar that connects them? Do I just have to replace both locks with one of these, so they work independently, and not use the bar? Thanks!

Can't find casement sash lock. I ordered 38-144 but it doesn't fit properly. Need to match the color as well. Please help

Hi, What is the width of this keeper? I only have about 7/16". (I will try to add a couple pics). The sash frame is about 1-1/16. I would like to move the keeper out about 1/8", but I suppose I would have to remove 1/8 from the jamb stop for the 38-144 sash lock to line up. Also, is the 38-144 mad ... (cont.)

Primary Casement Sash Lock, Non-Handed Product Code: 38-144 Hi! I have a broken plastic piece on my Peachtree/Crestline/Vetter Series 500 casement sash lock so the window doesn't lock (not good in MN; currently duct taped shut). There is also a secondary handleless lock on the window. Do I or ... (cont.)

I

Hi, I am needing a couple of handles, a lock, a cover, and a lock keeper for some windows I believe to be Pozzi. The house was built in the 90s. Any help would be appreciated. Thanks, Val

Window lock from row casement window. I believe inside it says "Truth"

Hello, I have 2 things I Am in need of help with. First the plastic latch has Broke on one of our crank open windows. I wasn't sure if I could just order the plastic part or I would need to get a whole new housing. Second the plastic strip that runs above those windows is cracking abs coming off ... (cont.)

I need several replacement Truth parts in the color "Clay". Specifically: 2x 38-144 2x 38-160 1x 39-013 1x 39-014 Can you get these? Thanks!