Viewing all customer Discussions for:

26-089P Keller Tilt Window Latch Pair, White

Looking for tilt latch replacements for several single hung aluminum windows installed in Jacksonville FL area in 1993

I need the latch for this tilt window

The pictures show the replacements needed. I didn't see any distinctive markings on the items. I do have a few more pictures, if necessary. These pieces are from a window by Empire Windows. Thank you.

I need 6 white tilt latches; 3 left hand and 3 right hand. Body is 3/4" wide and 2-1/4" long. Flange is 5/8" x 7/8". No names or numbers found.

Hello: Attached are three photos. IMG-0006 is the part I need and IMG-0007 & IMG-0008 are pictures of the part on the left and right side of the window. It has a spring inside it. I need 2 left and 2 right side pieces. Let me know if you have them please. Blessings Gene

I cannot find this part in any stores. There are no markings, part # etc on the part so I cannot look it up by manufacturere. If you can find one, please let me know.

Good Morning,Attached please find photo of window latch. I previously ordered Keller Tilt Window Latch - Item 26-089P - the top latch lines up correctly, however, it needs to have a brown side piece to allow it to be screwed in (please see photo). Here is a photo of the latch - it is the side piec ... (cont.)

Not sure what brand of window it is.

The width is 3/4 inches, the length is 2 1/4 inches and from the end of the bracket to the center of the screw it is 2 1/8 inches. The piece that goes down the side is 5/8 inches wide and 7/8 inches in length with s screw holes at the end.

seeking replacement tilt latch for builder grade aluminum windows. House built 1996

On a single pane double hung window - Single screw holding it down with a spring in the back.

unknown manuf. no identifiable markings tilt latch is 2 1/4 X 3/4 X 3/8 thick (not including latch point) pivot shoe is 1 7/8 X 1 (actually 15/16)X 7/16 thick at widest (top part) note: spiral tube is 3/8" dia (works ok)

The lock is just short a few millimeters! This is a 26-157 and 26-158. The mounting screw on the vertical lines up correctly.

does Keller 26089BP come in white - this is a latch for slide out windows

I am trying to find a match to this window latch.

Please help finf these replacements...plastic is dry, brittle and broken up.

not sure of mfg of windows. Appears to be your part number 26-089P numbers onlatch are 200 followed by 817-1 an in other place L 200 815

I'm looking for single hung clip for windows.the brand I had call Lock Pacific Industries. Thanks, Jennifer

Why this park has two screws and it's one on each end so one is vertical and horizontal

NEED LATCH FOR101-88 DH-R30Do you have these?Kathy