Viewing all customer Discussions for:

26-089P Keller Tilt Window Latch Pair, White

Hi, I have fairly old single hung windows and all the tilt window latches are broken and I am looking for replacements. I am not able to find any part that matches my current latches. Any help would be appreciated! Cheers, PJ

These parts have become worn over the last decade and it appears that you may have produced similar parts. I am looking for a way in order replacement parts as well as get instructions for keeping them oiled (I used bike lubricant on these).

I am attempting to locate window locks for a Pacific Industries window from 1994. I noticed in an earlier post that someone from Fairfiield, CA was looking for the exact same part and supplied pictures. Were you able to help him?

the windows was installed in 1996, some latches need to be replaced. Check the dimension, it doesn't look fitting mine especially the side screw hole. Can you suggest something match?

We have a customer with balance problems some windows open some dont. The window has Pacific Industries printed on it. Im having some trouble finding the correct parts. Im hoping the pictures help

Please identify the product replacement for my windows

Hello I have a Pacific Industries swing out window and your 26-089P looks good but the mounting hole on the top is 2 1/4 to center yours is 2 1/16 I think I could drill a new hole but wonder what you suggest. Thanks Robert

I was wondering if you have any of these? I believe the window manufacturer is kel star. Thanks

I may have ordered the incorrect product code 26-089p Please help me find the right part.

I am looking for tilt spring latches for windows also need a dual glazed pane replacement

My house was built in 1995. Virtually every tilt latch has broken. I'm having a hard time finding an exact match. I took a few photos. I'm hoping you have the right part for my windows or know of an after market part that will work. Thank you in advance for your assistance, Paul

the latch has no numbers or markings length 2 5/16 wide 3 quarters

looking for this type of window locks do you carry them . 2 1/2" long 3/4" wide can you help

I was hoping you can help identify a part. I am hoping you have a replacement for it. I have a Series 78, DH-R30, MST: 4563. I need to replace the plastic latches on a a bunch of windows. Do you have a latch that will work?

WE ARE LOOKING FOR THESE WINDOW LATCHS FOR AN IG PACIFIC WINDOW. PLEASE CAN YOU HELP Thank you, Denise C

Hi, I recently got the 26-089P parts to replace the Pacific Industry latches. However, the holes don't line up for the top of the sash (picture attached). Any suggestions? Thank you for your help.

I have a client that has a few broken tilt latch very much like the pictures that Paul responded with the 26-089P pair white and I'm going to order them. I would also like to order two of the window guides on the sides which is a round tube that screws at the top and has a twisted metal that attache ... (cont.)

I need replacement latches for multiple windows. They are for oringinal tilt windows with a metal frame from a house built in 1978. The latches are currently white but I would prefer black. I have seen models that appear to match except for the opening on the plastic comes down over the edge. Mi ... (cont.)

I need at least five new latches for my Pacific Industry tilt windows in my home because some of them have broke over the years. Can I purchase these from you???? Please help.

Hi, Picture 1 shows the bottom square piece needed (with the hole in the middle) Picture 2 and 3 show how this piece is missing. Picture 4 and 5 show the hook I bought from you a while back for this same window. I know the kit may come with more than just the square piece, i will buy the k ... (cont.)