Viewing all customer Discussions for:

26-119 Sash Release Lever

Having trouble finding this style tilt latch

I hope the pictures are sufficient. I'm looking to replace the latches that are attached by two screws to the window (underneath the top plastic strip that covers the top of the window. The latches are moved in and out. When they are not pushed in, there is an angled plastic piece that keeps the w ... (cont.)

There are no manufacturers labels or information. These windows are old and of an unknown age. Top is 2 inches in length by 7/8ths inch wide. The clip under the center is 1/2 inch.

I am looking to see if you have the release lever for these windows. What item number it would be?See photos Thanks Sam

I have Mastic windows where the tilt release levers are brittle and breaking. I do not see any on your website that have the same measurements. Wondering if I missed the one I need or maybe you have others not listed. OR maybe a substitute?

I need the tilt pin and a left hand tilt lock, as well as the slide piece.

I need to buy the Tilt Latch Actuator spare part, it has a broken leg and it seems that it is not manufactured, I can replace it with part 26-215, which comes complete.ThanksHernan

Please you have this part according to the attached specifications in photography.Thanks.Hernan

I need this replacement part for my tilt windows. On the lock of the window it has the word Rusco. I'm not sure what year the windows were put in.

See order # 1441365 for Sash Release Lever 26-119. These levers do not fit properly. the "U" shaped insert are to wide of our existing windows. While your's are 1/2"w x 1/2"h Our's are 3/8"w x 5/16"h. Otherwise the handle shapes and sizes are nearly identical. Picture attached. I'd like to return ... (cont.)

What latch and release lever do I need. Thanks

I have several of these that are broken. There are 2 per window frame, double hung style, it releases the pin that holds the top of the window in the frame so it can be tilted. They appear to be 2" long x 3/4" wide. Let me know please....

How do you find a tilt latch and a thumb knob to go with it ?

Hello, Im looking for for replacement latches as pictured. From a Patriot window with a pic of the model attached. I need the left and right. I didnt see any similar ones on your website. Thanks, Bob

Piece that goes into window track broken.

Can't find manufacturer label anyplace. Windows probably installed around 2000-2005 Need both left and right for 10 windows

Attached are photos of my latch and the sash release lever 26-119 for comparison. The dimensions of my latch are 2" x 3/4" (same, but not critical). The "feet" (one missing) are 1/2" (out to out) where the 26-119 is 1/2" also. The length of the foot is 5/16" with the "toe notch" at 1/4". The 26 ... (cont.)

Please advise if you have these tilt latch, will await reply. many thanks

Please look at drawing and the measurements and let me know so we can get these latches ordered i close on this house in two weeks.thank you,John

The dimensions for my lever is 2" by 3/4" by 1/4". The hooks are attached directly to the lever without additional bracing between them, which the item 26-119 has adding additional depth to. Thank you