Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Hoping that these can be identified, we're hoping to replace the hardware with something in oil rubbed bronze/black if possible.

Hi thereDo you happen to know why my arms slides out of the guide sometimes, making me have to hand put it back in before I close the window? It happens on several windows and that makes me think the little disk at the end of the arm is maybe worn out. I'd like to find the best way to do maintenance ... (cont.)

The pictures include one window lock 3" long; it is labeled "R" for right. The sill mounted operator shown is for the left window, but I want the right operator (old right one missing). The arm is 9" long. Can you order me the appropriate replacements for both? Thanks.

Aloha! Im the second owner of a Lindal cedar home in Kula, Maui, Hawaii. I have three window cranks I'd like to replace. The photos I included show the two that are similar, just open opposite directions. Please let me know if you need additional photos to determine what replacements I need. Th ... (cont.)

I am looking for some weather shield window and door hardware replacement parts. These are the original windows from the late 90 early 2000 built house. this home has over 100 windows and 9 doors.

Window will not open or close completely when cranked. Crank is located on the right side when viewed from the inside out.

hello i am looking for hadle for windows

This is an operator for an old weathershield casement window. It has a Truth 40055 LH identifier on the reverse side with a 9 1/2" arm. What do you recommend as a replacement? Thank you in advance for your attention to this issue. Bill

Please help me. I need to replace the hardware for (3) bathroom casement windows, and I need to order the parts which all look alike to me. See: attached pictures of the hardware I have and a picture of the casement window parts. What parts do I order (3) casement windows.

11 inch The bar is 11.25 inches long. The windows that I have have a channel at the bottom that a wheel rides in and they are rear mounted. Maybe a shorter arm might work? The height of the wheel is 5/16" tall and the groove that the wheel rides in is 9/16" wide. Yes I need 3 left and 3 right ... (cont.)

Hello, we are looking for this Marvin Awning Operator, the arm length is 9-1/2" and it has a pivot shoe on the end that connects to a rail on the bottom of the sash. Please let us know if you have this. Along with the crank handle. Thank you.

Can you help me find this casement operator 30146

The crank mechanism of one of my casement windows doesn't work properly anymore. When turning the crank, it feels as if the gear is missing some of its teeth. It grabs sometimes, but often it doesn't. I pulled the crank itself off the shaft and confirmed that the issue is *not* simply a loose fit of ... (cont.)

These are Truth which is the manufacture crank windows. Both our right hand and one is 13 inches and one is 9 inches single arm. I attached pictures of the front and back how it looks

Hello, I am having trouble finding a suitable window operator replacement for the attached photos. The window operator arm often falls out of the track when opening and closing the window all the way. How should I fix this? Will replacing the window operator arm resolve the issue? If so, which repl ... (cont.)

Need replacement

what are the dimensions of the crank body - how tall and how wide?

What is the proper replacement fixture Thanks

This window was forced open from a closed position and it ripped the metal from the channel. There is a plastic slider piece that is supposed to be in that track that I need to replace as well.

Need a replacement crank with arm as pictured.