Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Hello! I am looking to replace (2) lefts and (2) rights, can you help me identify these handles? Thank you!

the operating track, arm, hinge bar, hinge post, black plastic hinge guide for 9700 series casement window. 6 foot by 2 foot made by MI Home products. they gave me this address. the windows are 1996

Looking for a replacement window crank. Single Arm is 6.5" long #40049, crank body #LH45135, Crank handle #45199. Contains "TRUTH" branding with a house-type logo.

Hi, I have a left casement window and right casement window. On the left side (facing from indoors), the nylon bushings has fallen off which makes the arm not able to stay on the track to open and close the window. On the right side, the crank does not fully close the window. It goes part of the ... (cont.)

Helllo, I'd like to find a replacement window crank for the attached image. I need both the right and left sides. Thank you

Circa 1988 window casement operator. No idea how to spec replacement. Please assist.

Need 2 left hand and 2 right hand Also need the tracks on the windows

The crank gear mechanism I need is from the Crestline casement windows that were in stalled in my house about 43 years ago. The overall length of the arm and gears is about 12 inches. Reverse side TRUTH P/N is LH45135

Looking for replacement for this. Has 358-1R stamped on it.

as u can see in the pictures i need a new one of these what one do you suggest will fit

Just confirming the replacement arm for this. Also confirming if I need to purchase the crank separately.

Hi, I have 18 windows and would like help matching the part I need to replace.

Looking for weather seal on top of casement window. Model #JEL-N-555. Also the roller for the closer arm if it's available or the closer arm.

Extension arm - 358-2 Windows were installed in 1977

I also need a clip for the window to clip into.

Hello, I was hoping to get some help identifying the window cranks in the attached pictures. These have the roller wheel on the end of the arm and are Truth Hardware. Thanks so much for your help,Bob

I was working with you on replacing a complete operator set for a casement window.I need all the parts, operator, arms, window brackets channels.I will send another post with a couple more photos.I believe you identified what was the most likely fit, but i lost the information.My Best,Mike ... (cont.)

Swico: We live in a four unit condo. Each unit has a bay window with two casement side portions ? one left opening and one right opening. Several of them require several spins of the window crank before they start to move which, I'm guessing, indicates worn or stripped gear teeth. Based on the atta ... (cont.)

I am trying to find a crack like the one with the measuring tape. I purchased the one next to it but it is too long. Can you help? Tony

I need to replace both the right and left window crank assemble. The plastic round piece slips out of the track. The track is 7" and the arm is around 9". Thank you for your assistance