Viewing all customer Discussions for:

39-390 Awning Operator Kit, Short Arm

I was speaking with one of your technical specialist yesterday about an Anderson awning window operator and he suggested I send a few pictures. The operator is very similar to your 39-389, with the following differences: 1) The two mounting holes on the visible portion of the operator are missing ... (cont.)

the gear-head, where the window crank attaches, is stripped on our 1961 anderson tilt-out window.I have attached photos of an identical opened window, and of the damaged actuator and good crank. The crank is part no. 60-c-7041-62 I do not see a part number on the actuator. I will have to cut out pa ... (cont.)

Hello, I'm looking for replacements for some old window operators. The first is an awning window with a 27" track. The glass size is 35-3/4" x 13-1/2". The arm is between 10-1/2" and 11" from the end to the elbow. Pictures 1-3. The second is a casement window with a 14-1/2" track. The glass si ... (cont.)

Need the crank assembly in the pics attached.

I have an andersen window about 1959 vintage, i need a short arm operator 7041A

Our home was built in 1957 anderson windows ?? all awning type the window cranks are not working @ need replaced { still original windows } 12 in total. pictures enclosed of a crank all are the same. if more detailed info, is needed please let me know.

Hi, I am looking for a straight arm kit for a Andersen push out window. Also 2 awning kits I think? The window cranks on the awning windows work pushing them out and sometimes not. Do I need the whole kit or just parts?

Do you have a replacement for this awning operator on my Andersen window? The house was built in 1980. It's a small bathroom window.

I have an Andersen window from 1961. The roto lock system is about 34 3/8

I am renovating an old house. In the kitchen there are two Andersen awning windows with slid-lever mechanisms. The lower operator has a broken plastic disc so the slide slips and cannot move the window anymore. I bet it is only a matter of time before the upper on follows suit. I am concerned that n ... (cont.)

I am in need of replacement hardware for my Anderson Awning windows. I called Anderson and their part number is #0333808. I am attaching some pictures and from your site, I believe the parts we need are awning operator kit code 39-389 and anderson operator cover 39-286. The arms are 16" long. I ... (cont.)

Hello, Have Andersen awning windows throughout the house with the Amerock/Lever Roto-Lock design hardware and Flexivent windows...from 1968-1972. They are currently the swing/pivot style handles, not rotating crank. Seems a lot of pressure must be put on the handles, unit and gears to swing the ... (cont.)

Do you have a replacement for this old Andersen operator?

We have the awning operator on and it fits great on my larger window but if I put the brackets on the bottom of the sash (the only way it fits) ) it's no longer horizontal with the operator and catches the window sill ? Wondering if there is a different bracket that fits flush? If I figure this out ... (cont.)

I am looking for a double armed window system the plate Is 41/2 by 21/4 arms are 17in I have several windows that seem to be stripped inside the plate. Can you help me with what to order ? Thank-you,Dana Thomas

Do you have Andersen awning operator rod part number 1521104AWN in stock? Approximate 9" length. (9-3/4" overall length"), with screw holes 9-1/2" O.C.Also is it weather resistant?

sirs please help me identify and locate this window crank out handle. The difference between this one and others is the fact that this one has hexagon shaft built into the handle as opposed to being attached to thje operator itself. The shaft measures .25 inches diameter and .39 inches long. I ... (cont.)

Hi, I need to replace this. It has two arms, but I don't see anything on your site with two fixed arms. I can probably get by with one arm, but I sure could use your help! The arms are just about 11" each.On the window, is a rod that round clips on the end of the arms attach to, so I assume I'll ... (cont.)

I have this operator on a vinyl replacement window. I would like to use this unit on an Andersen wood awning window from the 1960's. It's 41" wide x 18" high. I think I can modify the sash to receive the scissor hardware but I'm not sure if it will push that wide a window out properly. I like the 15 ... (cont.)

These are from windows installed in the late 1950's