Viewing all customer Discussions for:

81-266 1-1/4" dia Roller And Axle Kit

I need to replace the roller for what I suspect to be a 1973 era sliding door. Previously, I purchased a couple rollers, however, they were not correct as the location of the height adjustment screw and the frame attachment were incorrect. As a last resort, replacing just the wheel will suffice. ... (cont.)

Hello, I'm in need of 2 new rollers for my aluminum sliding door. I was able to remove the wheels but have had no luck in replacing them and I hope you can help. The door is old, a little over 6 feet tall with a single sliding glass.The roller itself is approx. 1 3/8" tall (to the tang). 1/2" wide w ... (cont.)

Are you able to recommend a replacement solution?

Seems to be a brand X door. Sorry, my son thought it would be fun to take them apart and bend them all up. There are two of them on the door. There are no marking on the part or the door that we can find. Please help!

The rollers for our sliding glass door need to be replaced, but I have no idea how or if it can be done. There are no identification marks on the door itself and the rollers are attached to a single , track-like assembly that screws directly into the bottom of the door as one unit. Any help identi ... (cont.)

We purchased the door from Lowe's and I believe it is a Reliabilt. One wheel has collapsed because its bearing has broken. The case measures 4.5" x 1 5/8". There are two screw holes on the top of the case. I apologise that I did not photograph the door with the roller assembly installed but I ... (cont.)

Sliding glass door tandem Wheel diameter 1 3/8 in Length of part 3 in Body width 1 3/8

Hi I believe I have the 81-050 roller assembly. I am wondering if I could order a bronze roller for them part # 81-224 with the corresponding axle. Is it hard to take out the old axle? Do I just drill it out and then replace wheel with axle? Thanks. I will need 8 of the wheels and axles. ... (cont.)

Trying to identify and find rollers and lock mechanisms parts for old slider in my rental. Thanks, Eric

ID where I can get replacement parts for my sliding glass door.

Do you offer a solution for this roller? If not is there another that could be used for the project?

Hello, Please see the double roller part that is very hard to find. If you need the exact measurments please let me know, but I figured if you don't have anything close to this then why bother. Let me know. Thanks so much! Jared

CRL D1752 I found your part #81-050. But it has a nylon wheel. Do you have same with metal wheel?

Hello, I don't see any markings are numbers on the door itself but this is the wheel that I took off

I don't see any markings, hope you can help with the pics. Thank you.

Hi, My name is Luis. I would like to know if you carry the part of the pictures I uploaded. I believe my sister needs five. Thank you for your attention in this matter. Luis

Looks like part number 81-087.All measurements are right on except the wheel diameter. Mine is 1 1/4 yours says 1 1/2.Will these still work?Carl

9/16" width 1 5/16" height Metal 1 1/4" roller

Hi there. My mid-50s slider is suffering and in need of new wheels. I've searched the internet for photos of the same wheels, but no luck. The one identifying name is on the inside, but it's missing some letters so I'm not sure what the word actually is. The height adjustment on this door has to ... (cont.)

Roller assembly is 2 3/4" long & 3/4" wide Roller wheel is 1 1/2" in diameter Pin is 1/4" I haven't seen any rollers that even look like this !! Are there maybe updated or superseded replacement rollers available?? Thanks ?