Viewing all customer Discussions for:

79-030 Weatherstripped Faceplate, Long Throw

I see on the latch cover Adams Rite. Cover has a pile on outside. It's in one of the pictures. Door weatherstripping runs inside aluminum Chanel, which held on the door by screws, with same screws hight can be adjusted. V. Metrikis.

Comercial Double door

What is the replacement weatherstrip for 79-030? I have what looks like an older version and it's missing

I am looking for replacement stripping for double entry doors. The metal strips that hold the stripping is approximately 1/4" x 9/16". Each door is 83 1/4" x 38". There is also a strip along each mortised latch set that needs to be replaced. Both the metal strips and the insulation stripping its ... (cont.)

I have double glass doors to the entrance of our gasoline station. Doors are 1986 vintage and were made by Architectural Metals. I need weatherstripping to go between the doors. The existing weatherstripping for these 7 foot doors is a 1/2 inch of double felt that fits into a groove of that same wid ... (cont.)

moved my office into a strip mall commercial - this is what the front doors look like closing - big gap - old worn out half strip in place.. need something that will fill gap and secure my location from the outside elements. as u can seee from pic - only one of the doors has a slot for someth ... (cont.)

I think your 79-030 might be what I need for my church's commercial door seals. But what about a face plate for the latch? Do you have something for that?

Hi -- I'm looking at item #79-030 to replace an existing long through faceplate but I'm curious if you could tell me the height of the pile on the faceplate... the gap between the two doors is close to 1/2" so if the pile is shorter than that it isn't going to work for the application. Cheers! ... (cont.)

We bought a building for our business that has an old set of commercial glass doors. There is a huge gap in the middle where there is no weather stripping, because of the lock mechanism. (Pictures attached) Are there any remedies? In the winter both doors get totally frosted up.

I'm dealing with the subject door. I need: (1) Weatherstripped Faceplate - 1 1/8" x 7 1/4" Beveled-Brush Aluminum-I have a part number but am uncertain if it is the correct one. (30') Weathertripping (Wool pile). The existing weatherstripping measures 11/32" x 11/32". (2) Door Sweeps (W ... (cont.)

They are double entry doors, I measured at 1/4 x 1/4 do you carry something like this?

I have a commercial double front door that has lost pieces of its wool pile weatherstripping. The bottom sweep is also in bad shape. I'm having trouble finding the right measurements for this particular sized pile. The door is leaking air like crazy and we are in Florida so you can imagine that t ... (cont.)

I am looking to replace the sweep in my restaurant storefront main door. The piece is screwed into the frame. I will also be ordering a plate with the sweep included as well. My board of health inspection cited me for having too large a gap. Thank you for your help in figuring this out. -Julia ... (cont.)

I am looking for a strike plate measuring 6 7/8" x 1" which has weather pile built in.

Greetings, Do you have something that might work here? Thanks, Brad

Hello, i am in search of weather strips for this door. The technician on site told me the gap that the weather strip slides into is 1/4inch, and appears to be of the wool type seal. There is a 3/8th gap between the two doors that is currently not sealing because the strip is worn. i also need ... (cont.)

Hi, where can I find this kind of rubber gaskets. I need about 20 pieces , 7' high. Thank you Paolo

I have been looking on your website at weather stripping. I think I have the correct part number for in between the doors. But I need to find out the correct one for the bottom of the doors. The doors are a double swinging door that measure 83.25

Here are some pictures of the doors that need the Amarlite weatherstrip replaced. The dimensions of the weatherstrip is 5/8" wide x 1/4" deep. Due to the lock on the doors, the top portion is 32 1/2" and the bottom portion is 45 1/2". It is 1/8" - 3/16" between the double doors. There are 2 sets of ... (cont.)

Hello, My weather stripping face place long throw is perfect match for your product 79-030, with the exception mine clearly measures 1 1/8 in overall width. I need your help please.