Viewing all customer Discussions for:

58-180 Stick-On Foam Door Seal

We have Certainteed windows and need to replace the weather stripping on the front four casement windows. Company is out of business. Can you help? Pictures included. The T- track is 5/32" and the foam part measures 3/8" across.

I have a home that was built in 1943. The doors have been replaced but prior to my purchase in 2010 (they are Stanley doors - I'm unsure of the model). The weatherstripping that is currently attached is done so with an adhesive (not screws or nails) and is starting to break away. Try as I might I've ... (cont.)

As installed, the seal's visible facing is 3/4" wide Four separate pieces: two at 36", two at 78"

You folks are the best! The door parts I recently ordered fit perfectly, but now I also need to replace the weather stripping. I found the attached image on your website, and my door has exactly the same configuration. However, I can't find the replacement weather stripping anywhere in your onlin ... (cont.)

Hi. Sorry, I do not have an installed photo. I'm looking for this weather stripping for Weather Shield double hung windows from the 1990's. The "C" shape is 1/2 inch from tip to tip. Thanks. Curt

Hello,I have a 30 year old steel exterior door and don't know the manufacturer. I am wanting to replace the weatherstripping and haven't been able to find one like the one on the door. Attached is a picture of the profile. It has a spong rubber seal and a bead where it pushes into a channel on th ... (cont.)

Window dated/installed 3/04. vinyl covered foam, in the shape of a "U", with one side shorter. the side that fits into the kerf is about 5/16", the seal part is about 7/16".

The door seal is probably from 1996 when townhouse was built. It has a cord portion that fits into space around door frame. Can't find this replacement anywhere or online. Help!

Hello, This is the jamb weather stripping for a front door on a house built in early to mid 90's the round white bubble part measures at ¼ inch where it kerfs into the door. We would be fine going to a regular kerf as long as it would fill and adhere into the kerf area on the existing door wit ... (cont.)

I need the bottom weather seal for Crestline double hung window made in 2004

Hi, Enclosed is a picture of my patio door handle. Please help me identify the part number. Thanks, Rudy

I am looking to replace what appears to be a very small (3/16 wide) V-shaped weatherstripping on the inside of Anderson sliding doors. One part has an adhesive strip on the back, The other half of the V rides on the door as you open and close it. It appears to be a moderately hard plastic or vinyl. ... (cont.)

I'm looking for some new weatherstripping that I can't seem to find online anywhere. I believe the backside of this is a double stick tape and it's a vinyl product that is flexible in the shape of a V.

I need to replace the door pivot hinge please let me know what is the part #, also i need weather strip Thanks

My main concern is how to reduce the draft coming from the track. More concerning is the draft coming through the small cutout area to the left of the adjustment holes. Both of those areas on the top and bottom of the door are letting in more air than both tracks. I have included a picture of a smal ... (cont.)

Hello - my front door has a noticeable gap where air comes through on the side. Strangely it is only below the latch on the lower half. Is there anything I can buy to prevent air flow or is it the way the door is hung?

Hi, My Simonton double sash windows are in need of new weather stripping. Please review provided pictures and recommend weather strip replacement. Thank you.

I believe part 58-182 looks to be the match, My T-slot is 3/16, overall length is 13/16, and the foam ball is 5/16, which all look to match this product. I need 100'.

Need to find weather stripping, approx 20 ft. No markings for window manufacturer

This is the bottom seal of my windows. I need to replace because parts were cut at improper lengths. The "T" slides into a channel at the bottom of the window and is solid plastic. Do you have any recommendations?