Viewing all customer Discussions for:

82-260 Multi-Point Mortise Lock with Pocket Plate, 12"

Does that com in a kit with bronze handles?

Have a multi point lock, measured 12" hole c to hole c , you can see cracked housing toward bottom, looking for replacement

Need to replace the internal lock and keyed handle set for a sliding glass door. I believe your mortise lock (82-260, 12 inches) will replace the internal mechanism, but I need a compatible keyed handle set as well. Any recommendations?

One dang screw was loose so as I started to unscrew stuff to then tighten it back together... I stupidly unscrewed too much and the lock mechanism slid down inside the door. I'd (in this order) 1) take the door off/turn it upside down/get the parts out and screw it in right but can't seem to get th ... (cont.)

The lock mechanism is defective and indoor handle lock/unlock lever is broken Lock mechanism 12" center of mounting screws. Outdoor handle has no locking mechanism - Handle only. I have attached some photos. set for a Alside Model# 6106-6"

Im wanting to match this door latch . Its a Pella sliding patio door .

The small knob end piece has broke off, probably need to replace the insides also. It's for my house, I actually installed this myself it is a keyed entry sliding patio door from window world bout about 15 years ago.

JG-1009 Z09356 09 2449 possible mfg part # 02100937 need the multi grabber mortice lock that will fit this Marvin door

can you please help us find a replacement mortise lock for a Jeld-Wen sliding patio door? pictures attached. Do you need additional info? is the 82-239 a direct replacement and will it work with the keyed lock on the new handles? please advise, thanks!

We got this patio door from another party and is missing what holds the stationary door in place, which we don't know what that is, missing the handle inside and out, missing the other half of the lock mechanism. The only marking is in the glass which says ppg herculite k.The size of the locking mec ... (cont.)

Hello - I am looking for a replacement for what I think is a Truth 32612 TWO-POINT MORTISE LOCK. Do you have a recommendation? Thanks, Jeff

Please confirm I need the 82-260 MULTI-POINT MORTISE LOCK WITH POCKET PLATE, 12" as a replacement. The only identifying marks are SEP 09, PAT #6.264.262 and PAT#5.820.170. Thank you.

Broke, part number

Looking for the strike plate for this Pelli door lock? Jerry

Looking to replace this latch with an outside key lock and latch. Can you help?

I have 2 of the same doors, one has a handle on both sides but no handle with the locking mechanism, there appears to be the hardware in the door. (photo door 2) The other door the outside handle broke off but the lock works (photo door 1) If I can get replacement for the one with no locking mecha ... (cont.)

Hello, my name is Omar. I need to replace two locks and handles like the one in the picture. They don't use key. The door is 1 1/16 thick.

Sliding glass door double lock. No name on the door to identify the brand. Total part from top today bottom in 12 1/2".

Need this Muti-point mortise lock with face plate 12 in

I need an internal lock and locking mechanism, the one that slides up and down on the frame work on the left side of the handle. The keeper is fine as shown in photo. The keep dimensions of the keeper are: 9 3/4" in total. Screw hole to screw hole 8 11/16" . Width 11/16". Space between where lock go ... (cont.)