Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

I have an aluminum sliding door in our basement. I believe it might be original with the house ~1969. The nylon rollers are shot, and I'm trying to replace them. I got the door out, only to find that I believe the roller assemblies are riveted to the bottom stile of the door. I marked the rivet ... (cont.)

I have a job to replace rollers for a home. Built in 1957. Large single pane doors. Never seen these rollers with clips. Any ideas? Thanks

Greetings, I need to replace the rollers on my patio door. The dimensions are:2 1/2" x 5/16", the wheel is 15/16". Please help image.jpg Rob

I need a replacement top guide, similar to your part 86-025 but mine is only 7/8" wide that must slide into the frame. Im also looking for better rollers, I have 1 1/2" PLPCI.net D 1822 rollers, look like your 81-261 product but they are so noisy Is there a replacement that has poly wheels? I nee ... (cont.)

I have an old aluminum patio door, double glazing, one of the roller wheel is broken. The size of the wheel: Width: 5/8 in Height: 1.3/8 in Wheel: 1.14/16 diameter

Not sure of the door maker, but adjustment Philips screw is recessed on the inside of the door. Most of the rollers adjustment screws are located at the end of the door. Is there a place to find the manufactures name on sliding glass doors?

Please help with this roller part for a sliding glass door. We are having trouble communicating with you, and getting a response to find out if this part can be found.

Sliding door wheel and housing

my current roller has the same measurements as 23-092, with a nylon wheel. My measure, wheel diameter 1/8, 3/4 flare, with 9/16 inches.The 23-043 diameter is 1/8 longer than my roller. Should I buy 23-092 or 23-043?For tha matching track 23-271.My door frame opening is 59.5 inch. Will 0.5 shorter th ... (cont.)

I need replacement rollers for doors from the 1960's or 1970's. I cannot find a manufacturer name anywhere on the doors or frame.

I am wondering if you have the replacement wheels for the sliding doors for this sumroom? Thank You Derek

Hi, I need to replace the rollers shown in the attached picture for 18 sliding glass doors for a total of 72 rollers (one set of rollers is duplicated). The original hardware shown comes from a 1962 home and only marking found were the name "KILIAN"

Hi Mike,I believe you are correct that the 81-081 roller is the correct replacement for yours but with a steel wheel instead of nylon. This roller with a steel wheel will still work for you as long as all fo the dimensions line up but if you prefer to use a nylon wheel, you could replace the wheel i ... (cont.)

There is not apparent lettering on the metal components but the plastic wheel has the following working: 8 * Syracuse, NY * Killian * Toronto, CAN Mirror Bi-fold Doors are at least 25 years old.

Housing in 5" long by .75 high, .75 thick. Single wheel in housing 1.5 diameter 7/16 thick nylon or some kind of plastic. Do you have these?

I need to replace 4 rollers assemblies with stainless steel. I have 1 1/4" wheels. Your item 81-181 is a match except for the wheel size. What do you recommend?

My windows are new air so I Am guessing the glass doors are also. Not sure if nylon rollers would be smoother rolling ?

The patio door was installed in 1957. i need to replace the roller and am not sure of the part. I dont think it is still being manufactured, but need to know an equivalent part?? thank you

need rollers for a Patio Enclosures door, although mine are not on a bracket but just riveted in. Wheel is 1"3/8 diameter,5/8 wide. Housing is 1"3/8 deep and 5/8" wide Do you have what I need?Thanks,Bill

Hi, trying to find rollers for a sliding door that was installed 40 years ago from Australia. No branding that we can find- the wheel is 1-1/4" diameter, width of the whole bracket is about 5/8" (16mm). One side has an F tab and the other side has a clearance hole for a screw to attach into the alum ... (cont.)