Viewing all customer Discussions for:

82-265 Multi-Point Mortise Lock with Face Plate, 11"

Hello Looking for a replacement double mortise lock for my sliding patio door that will also fit with my current handles. Can you help?

The following is stamped on the sliding glass door: guardian geneva, ny ansi z97.1-2009 16 cfr 1201 II safety tempered Socc 2259 I/8UA I need to find a replacement for the door lock to the sliding glass door.

Just bought this house, no key on patio door that goes out to main road, please help with replacement

Hello from TN, Really need some help. Top locking mech. stuck in the downward (almost locked) position. Something inside the set broke and I would like to replace the whole piece, just can't find one the same size. Please help - Photos attached. Thank you, BW

Im looking for a cmplete lock assembly for my vinyl sliding glass door , its a double mortase style with a set back of 1 1/8 inch set back with the cut out for motaise being 7 7/8 inch and handle holes being 3 7/8 inch center to center , any help in this matter is greatly appreciated. Thank you ... (cont.)

replacement handles for left side vinyl sliding door with lock

I am trying to determine what new Keyed Handle Set I need to replace my daughters slider lock and handle. The door has very little info that I can find other than on the between glass blinds operating knob, it indicates Novatech "Discretion". Someone has clearly changed the handle set to a non-locki ... (cont.)

Patio lock replacement

Hi, My handle with key lock is broken and will not lock, I need a new one can you tell me which one this is and do you sell them?

I dropped my mortise lock into the door. Then I took the door sash off and turned it upside down. But I missed the mortise lock on the way by, and now it's stuck in the top of the door. Please see measurements in attachment. Plus a Swisco guy asked me to measure the hole space on the screw holes o ... (cont.)

What is the correct keeper for mortise 82-265?

Part needed

This is a jeld-wen door purchased from Menards approximately in 2014. I don't have a model number. The interior locking mechanism works if I remove the handles and insert a flathead screwdriver to open and close the lock, and the fixed hardware on the door frame is also intact. The Interior and exte ... (cont.)

Approximately 2 years ago or thereabouts, I ordered a door handle with lock for a very heavy slider door from Swisco. I need a replacement for it.I have included photos of it.I have a set of keys but unfortunately, there are no markings on them to identify the model/make/size, etc.Please advise so t ... (cont.)

Hello, I am looking for a sliding glass door latch and gap filler piece for my door. I have attached pictures to show what I need. I have 2 door and one is missing everything. I can send more pictures if need be.

Looking to purchase locking latch for a Home Depot exterior glass sliding door. The only markings on the latch housing is "Pat Pend" and it is 10" long and a little over an inch wide. I have attached the following: 1-Sticker inside top of door 2-Locking mechanism

Hi, I'm looking for the correct door lock replacement for our Schlage SGD- R35 71 x 80 sliding glass doors. The 82-265 looks like it will fit based on measurements if I don't use the white cover plate in photo 1. What is a good replacement lock to fit with 1 3/4 center holes with the 82-265? Or do I ... (cont.)

I previously purchased parts 82-265 and 82-249. Now the latch lever had broken as seen in the attached pictures. Two questions. One, is this the correct lever replacement part? Two, can I simply replace the lever or do I need to replace the entire handle and lock?

Can't find any names of anything. Possibly from Home Depot based on a sticker found in the door frame from installation. The lock mechanism failed and the lock handle also broke. Need to replace both.

Hi - my sliding glass door lock is not working. One of the latches on the mortise is stuck in the locked position and I'm looking for a replacement double mortise lock mechanism. I think the door brand is Atrium/Windsor Signature Series. I am unsure which item is the correct replacement mortise lo ... (cont.)