Viewing all customer Discussions for:

S395-17 17" Series 395 Channel Balance

I need to replace the pictures window balances. I tried to reinstall them but they are old and the clips bend and the springs are not too springy.

I am looking to purchase two pairs of channel balances, one set for my bathroom which are 17" in length and 1/2" width with code stamp 1610Z not shown in images but with exact same hardware as shown. And then another pair for my kitchen window that are 23" in length and 1/2" width with a code stamp ... (cont.)

No names or numbers, there is a 1640x on the existing part which I couldn't find on your website. please let me know what part do I need to order. Thank you

Hello,I need to find the right channel balance for a Viking window. The number on the part is 1620 T.

Here are pics on my broken parts. The metal piece seems to be 17 inches and the "shoe" a little over one inch I think.

Hi, I'm Looking to find replacement risers for an old Viking single-hung window. The aluminum measurement is 17". The photos are attached. It is hard to show them attached to the window because they are falling apart, so I included frame pictures. Let me know if there is anything else I can include ... (cont.)

Hi! I have some windows where the balance does stay attached to the sash. The springs in balance seems like they are still strong but the move up fairly slowly when the window is lifted. They also can shift above the sash. I tried replacing the sash cam occasionally. Should replacing the whole bala ... (cont.)

Looking for replacement Atrium Sash window channel balance. Original part has markings '16 3 JW CMC 7' as shown in picture. Can you provide me with the proper replacement part number?

Markings on item 1620 BF

Need help identifying window balance part # for replacement

I purchased a pair of channel balances (S395-17 Option 1610) for a small non-tilt window manufactured by PGT. The S395 style is correct The existing channel balance is stamped 17 1 EW CMC 4. I wrongly interpreted the code to mean 17 inch and the 1 to signify the lightest load class but the balanc ... (cont.)

We need to replace the window channel balances and top piece for 4 sets of aluminum windows in our 1980s home. I attached photos and can provide more. The stamped code on the piece is 1610. Based on your website I think we might need 16" 385 channel balance product code S385-16 and 5/8" top sash cod ... (cont.)

I need 4 channel balances. Stamped with 1620. The one I photographed is the only one that is left. One wing on the top piece is broken off.

Series Mark 40/50 window: 17" non-tilt window balanceHi. Attached are 5 photos of the same balance. The channel is 17". The markings are: 16 3 Caldwell. Can you please let me know your part number? I need 2 pcs.Thank you.Mike

Hello, I made my way through your selector but did not find a 1690 rated model. Can you please direct me to the right one? Overall channel length (not including end caps) is 17". Thank you for your help! -Brian

Hi. My Viking windows will not stay up. I measure the channel balance metal to metal at 17" long. Number on it says 1610ec Which ones should I order? Thank you

I need to replace the window channel balances in 2 windows for a total of 4 replacements. Please advise me of the items identity and cost so I can place an order with you. Thank you! Dana

These are from a non-tilting Viking window. They are 17" long. I need complete replacements, including the plastic ends. One has "1620" and the other "1610C" stamped on them.

The channel is marked; 1610v and is 17 inches long not including attachments

The Balance channel is 17 in long metal to metal end and the markings on top the only markings I saw says 16 3 FR Caldwell. I would like to know the replacement part. I need two of them and the link to where I can order them thank you very much.