Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

The attached photos are for a 1/2" channel balance that is 38" long. I have included pictures of the top and bottom ends, as well as the serial number on the channel itself. In case you are not able to read it, the serial number is 37DS48L and it also says B61 VD in small letters below it. The ... (cont.)

Hello, We are looking for replacements for our sash balances. they are 27" total length with ends attached they have markings on them. one says 2530 the other says 2540. can you let me know which part number to order for the complete set of balances. Thank you

I need (2) two window balances for an Alenco sash part #2740 N

I have attached pics of the channel balances I am trying to replace. Looks to me like they are Viking Window balances with a 19-005 on one end and a 15-002 on the other. I do not see a combination with this option on your website, and want to make sure I order the correct ones. They are for three ... (cont.)

I need to replace a Jordan Window channel balance(2)(Pics 057, 052, 053) Can not read the stamp on them but looks like Caldwell 28311. Also need the cap that goes on the sliding window (Pics 060,061). The window is a 20 yr old Jordan NON TILT vertical slide (up/down) window. It weighs 25 lbs, 34 ... (cont.)

My home was built in the early 1980's with 20 Alenco windows of different sizes & shapes. All have problems with the channel balances. My first repair project is missing a channel balance. The remaining one does not have any block & tackle. 28" length,

Is this a 351?

Hi, I'm writing to check if this is the right replacement part for our windows. 2420 is stamped on it, and it's 25" long, approx 1/2" wide. I'll attach some photos of the part I have. Thanks for your help. Donna

I have Alenco double pain windows approx. 25 years old. Both balances have fallen out of one window and I need to repair, replace. Another window is stuck shut--presumably balance issues. The balances that fell out came out of windows that are 27 high and 42 wide each for upper and lower. Bala ... (cont.)

1/2" wide and measured at 29" length.

I am a home owner and I have some windows that will not stay open. They are non-tilt windows, that have broken balance on each side. I purchased some from your company but cannot seem to get them to work. They are 29

Is this a 15-002 or 15-001 bottom Shoe? Thanks, Carter

Hi, I need to order a few window balances. The balance pictured is 27 inches long and 1/2 inch wide. The only writing stamped on it is 2630. I see many different 1/2 wide channel balances but the different series, plastic tops, and shoes I'm not sure which specific model to order. Thank y ... (cont.)

I have a wooden sash, double hung, non-tilting window with a bad channel balance. The part is stamped with "20 4 FS CALDWELL". Size of the metal channel (not including plastic top/shoe) is 5/8" x 21". Weight of the sash is 18 pounds. Top matches Swisco 19-002 Shoe matches Swisco 15-003 I d ... (cont.)

hi thse balances say 1740X. I need to see what p[lastic tops and bottoms they come with so I canorder the right ones from your website.

Just bought a house and most of the windows don't stay open. Used the videos here to learn how to remove the channel balance on one window and the things just fell apart as soon as I took them out. First, I need help figuring out what parts I need. It has a 2730 stamp and measures 1/2" (maybe 9/ ... (cont.)

3

Two different size windows that are from the same mfg. company in the same home need channel balances replace that are broken

I need 2 channel balances for a single hung no swing/titl window. 1/2 inch channel width 28 inches long.

I want to order ten (10) of this balance. Please, help to identify the balance and send me quotation.