Viewing all customer Discussions for:

26-393B Tilt Latch Pair

What is the correct replacement for this part the original was made by republic windows who is no longer in business. Thanks

How do I measure the length of the latch part so that it fits? Also on my double hung window there is a spring loaded piece that stops the window from opening beyond 6". The spring seems to be not working so are there replacement parts for that? How do I locate the product manufacture?Model 4900 ser ... (cont.)

Hello,I'd like to replace this broken latch. Not sure which one to use. I think Part number 26-393 will work. I'll replace both left and right sides.Please let me know if that part will work. I have more pictures if needed.Thank youMichael

HI, 26-393 and 26-393B look similar to what I have in my vinyl windows. My latches measure 11/16" x 2-3/8" and are a spring loaded type. Which version to purchase? Tx

Thank you for taking the time to review my photos of the tilt locks from my daughters home . She is a single mother of two small children and as her father I am trying to help. If you have them, I would want to order a dozen rights and lefts to replace damaged locks as well as have a few spares for ... (cont.)

I need to get replacement shoes for my windows. They are stamped with part number 6679000. The channel balance is stamped with 32-1 and has a length of 33"(84mm). Pictures of both are attached. I also need the replacement latches (2 per window). Do you have these parts? If we can replace just the s ... (cont.)

Hi, I hope you can help me I need 20 of the tilt closures pictured above. The Windows and the current closures do not have any part numbers only a 7 and Patient on the inside on the closer. Thanks. Chuck

Vinyl window tilt latch (white), mortise installation, 3/8 inch thick housing. Rectangular top is 2 3/8" x 5/8". Comes in a pair, left and right.

Hello, I have Pella Thermostar windows that were installed in 2006. Miraculously, my tilt latches have lasted this long. Recently, I found one had broken. I am curious if your parts will fit my windows. I measured the casing of the removed, broken latch and it is 2 3/8" long. All others that I ... (cont.)

Need to replace latches for 4 windows 4 sets of left and right. Not sure what size to order. Only marking on back is a No 2. Thank you

Pella's windows (2) pairs of 2-3/8" Long "Position guide latch"

Need to identify replacement for this part.

need 8 left 8 right

I need to purchase two pivot pins for the top sash of a double hung window. I think the pin matches this one-flared pivot bar 2 1/2" 26-412. the original pin on one side broke off inside the pivot shoe and I don't know how to get it out of the shoe. Is there a replacement shoe that I can get for ... (cont.)

Manufacturer sent me the block and tackle balance to repair my window but did not send the rest of the parts for repair. Can you help me so I can get this window repaired. It is a single hung window. Thank you.

I need 3 pair of the inverted channel balances with the T shoe. stamped on it was "26-5 TD BSIN". I also need 2 pair of the plastic snaps. they measure 5/8ths wide and 2 3/8ths long. please let me know if you need anything else and also how to order. thanks joe

Looking for this tilt latch...

All I know is inside the window on a metal is engraved "JDl 2012"

Please help identify the window tilt latch in the pictures. Thank you Marnette

tilt latch size is 2 and 3/4 length by 3/4 in. width silverline series 2900 DP 50 Hope this helps to identify them