Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Hi Tom- My dad, Jerry Nappi, asked me to send you some pictures of the part he needs. The images are attached. Please let me and my dad know if you need anything else. I can send you more pictures because this site only allows me to attach 5. Thanks, Stephanie

I need help in identifying these balances. I have 4 windows right now that are really hard to open and need to balances. Attached are some pictures.

I have a channel balance for a non-tilting window with the following markings: 25 5 cx cmc 11 It is a 1/2 inch in width and 25 inches long. I have attached 4 photos which I hope will help you identify it. Thanks. -JK-

Hello, Can you please help me to ID the correct replacement channel balance for my window. Marking on channel balance is 30 3 JN Caldwell Marking on window is MFGR: RYL-017-1 SERIES: VS-5A MST: 4-0 x 6-0 MVT: 48" x 36" channel balance is 31" long Thanks, Cristin

I have identified our channel balances as 351 block and tackle balances with 33" long metal channel, non-tilt window. I do not understand the option selection. I have looked for a stamp or a mark on the window frame and cannot find one to indicate weight. Also, the removal of the channel balance d ... (cont.)

Have 20 Florida Extruder Milestone 1000 single hung windows. Replaced the channel balances in several windows within the first two years under warranty and over the last 4+ years an additional 9 windows are now no longer working. Some of the now broken balances are windows opened rarely and others i ... (cont.)

I am looking for a replacement for this Harcar channel ballance. It has a 9/16ths inch wide, by 5/8ths inch deep, by 20 inch tall channel. Attached are pictures of the front, back, top, bottom, and the stamp. The stamp says 2330AA B.S.I What can I replace it with?

Hello, I am hopefully in the right place. I need some replacement balancers for my Traco 240 security/impact windows I bought at Home Depot, Miami. I believe the correct parts are discussed on this discussion page. I've changed these before and the plastic ends look right (see attached pics) ... (cont.)

Good Day, I have 2 windows marked as so... * Single Hung window * Series Mark 40/50 Premium Standard * AAMA/NWWDA 101/I.S. 2-97 * H-LC25/35-52x96 * Mfr. Code Kinco, LTD in Jax, FL ...and am in need of ordering channel balances (1/2" wide & 25" in length) for each. I have boiled it down ... (cont.)

I need a replacement balance for a single-hung non-tilt vinyl window. I have attached images of the balance with the stamp and shoes for your ready reference. The length of the metal is 31" and width of channel is 9/16" Thank you for your kind help. Bis

Our house is 6 years old and the majority of the sash mechanisms have failed. How do I identify replacement units? I have included pics from one set of failed units; the others are all of the same brand, although are different lengths and I suspect different spring strengths. UB 28D ... (cont.)

I have a 3510 Lawson balance and need a replacement set. It"s 36 inches. I"m having problems identifying the top and bottom from photos. Each has wings. It looks very much like 19-007 but 007 size is wrong. Can you help me. Thanks, Mike

I have Alenco windows, and the metal tip-to-metal tip is 28" long. "2740" is stamped on one end of one side, and "27C" is stamped on one end of the other side. Attached are pictures of the balances. The first 2 are one end of balance-1. The 3rd is the opposite end of balance-1. The last two are of 1 ... (cont.)

Hi, One of the channel balances on my window broke (the cord snapped) and I am trying to find a replacement. Per your website I'll replace both so I have two new balances. Problem is I can't seem to find the right shoe. From your pictures the top is 19-005 (i think). Can you take a look at th ... (cont.)

I wish to purchase replacement balances and top sash guides for my Alcan non-tilt windows installed late 1980s. See pictures included. I need help identifying proper replacement parts. Alcan numbers on existing balances are: 1710W, 1710E, 2910W 30", and 2930W (all 1/2"). I'm guessing Product C ... (cont.)

I need a 26 inch channel balance replacement. It looks like the 380 or 385 series. I don't know which option I need. On the channel balance is printed "25-9 IX CMC 11." Not sure what this means. Thanks Burke

Hi, I have a 26" Caldwell window balance I need to replace. I got a little confused since it looks like there are two different series balances you offer that match my balance and then multiple stamp options as well that don't seem to match the stamps on my balance. Can you please help me out? See i ... (cont.)

I have a customer with a window that has a broken channel set. It is stamped 3230 but the plastic parts are completely missing or broken. The bottom pc is 15/16" from front to back, and side to side (tabs). The top pcs look broken and are 1-1/8"-1-3/32" wide at the tabs. Can you please tell me w ... (cont.)

Hello I wanna replace 8 channel balances they stamped 21 4 ep caldwell they ate 1/2 " wide can find them nowhere which ones could be use

Greetings! I have a number of Nuair windows that need channel balances, and I wanted to get the correct ones. My balance is marked 34-4-FU-CMC-2. I have a 19-005 top, but I can't decipher whether I need a 15-004 or 15-005 bottom. How do you tell? Any help would be appreciated, thank you! M ... (cont.)