Viewing all customer Discussions for:

82-086 Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")

The mortise on my sliding glass door would work sometimes and actually locked in a closed position for awhile. Finally got it to open and now need to replace.

I have a Guardian sliding glass patio door with the inside handle mounting piece has a piece of the interior screw holding mount broken off Attached is a picture. The handle unit is 9.5 inches in length and 1.0 inch in width. The distance from the top of the top screw to the bottom of the lower s ... (cont.)

What is the part number for keys and cylinder assembly. Pictures attached.

I am missing the lock mechanism for the glass slider I purchased 7 years ago. There are no markings on the door like a serial number or model number. I need a lock mechanism for a Jed-Wen door sent to me Please call me

Hi I need to replaced the key entry lock on my sliding glass patio door as seen on the picture the lock has a double locking latch.

Is this handle the same as the Simonton 5050? The picture is identical to my broken one. It was made in 2010.

Needing to replace the door handle as it has cracked recently. When I google the numbers located on the label inside the frame it brought me to your website.

I have 2 locking door handles which are only on the inside of door. I'm showing the left opening handle. The right opening handle is cracked so I would like to replace both of them. Please send me a price and availability so I can get them ordered. Thank you.

These are the images for the outside handle on my patio door. I need the inside and the outside handle for a right-hand opening and for a left-hand opening. I also need the latch levers for each. If it is possible to purchase extra latch levers, I would like to get 4 latch levels. ... (cont.)

New mortise lock and handles

Would Thisbe something you could supply?

Hi just want to replace or install key lock outside where can i buy.

I haven't uninstalled the piece yet. The inside latch that locks the door broke off. Any help is appreciated! Thank you!

Am needing a sliding glass door handle with lock and latch for an Argon door.

Looking for replacement handle and lock for Nami sliding doors

Need two handle sets with outdoor keyed locks. One set with indoor lock.

The handle was made at sash controls in Canton,SD The patent number is D466787 The handle dimensions are 9 15/16 long X 1 5/16 wide.The spacing for the mounting holes are standard 3 15/16.bronze in color

I have a condo. I need to repair these parts for the sliding door .

Hello, I recently purchased a 82-086 - Legacy Keyed Handle Set from you. The handle set fits the door and works with the lock, but I have 2 problems with the product. Problem 1) They key will not come out of the lock. I've tested in both the locked and unlocked position, but the key will not come ou ... (cont.)

Looking for a locking handle. We have a non locking 3-15/16" currently and the lock is offset with double 11" mortise lock. Do we need a 82-030B? Thanks