Viewing all customer Discussions for:

82-086 Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")

Patio door has no manufacturer. I suspect atrium made it because all the windows were made by atrium.

My handles have broken off and I need a replacement set but I'm not sure which one I need.

I need to replace the locking handles on my slider door and want to use the existing mortise which has a double hook, will this one work ? The screw holes are 3 15/16 apart on existing handle and the mortise looks similar to your 82-259. The door is 2 inches wide. Thanks !

Need this replaced!! Mechanism dosnt work right and lock tab is twisted. This is the only source I have found to ask questions. I just want to confirm exact part and find a fast deal for a good strong replacement.

No way to lock Need look with key and inside locking mechanic What make is this

Hello, need to identify sliding glass door locks. Thanks, Jorge

Can the lock box be turned the other way? For my existing holes to line up the lock would need to be in the upper hole. Looks like it will leave an open hole in keyless handle though. Thanks

Hi we need a new door handle assy and hoped you could help us.Thanks - Ron

HelloCan you please help identify our sliding door lockThanks,Peter

We need a latch lever for a patio door. Lock works with a screwdriver. Door is1 3/4" thick, screws are 3 15/16" centers The latch is about 1 1/4" from the screw. It is not centered between screws. The key shaft from the outside of the door sticks through the door at about 7/8" leaving a gap of abou ... (cont.)

Hi, our lock is worn out on the patio, and I've identified part 82-226 (4 5/8" mortise lock) as the replacement. While we're at it, we'd like to replace the inside and outside handles. We'd like white, silver or brushed nickel finish. Do you have some choices that would fit?

The inside lock fell off the door. A piece inside of it broke off See pictures. Descrip.6068 72?x80? FCRO Wh VS/I/TAA/DS/H white right open dbl str. TmprA 9050-1000-00 106-0100-000 Thank you.

Need help ordering new door hardware

This is a fairly new set of doors, and the outside handle has already broken. I have tried to search for one, but it's hard to see if they are an exact match.

Just want to confirm that this is likely 82-086. Want to change out so I can have a keyed lock. Not sure what brand original is............Thanks.

Can you tell me how/where I can get a replacement for these parts?

4 1/4 inch

I am in need of two casement operator's and one white handle for a six-foot slider both are MW products. The house was built around 2002.

I need some assistance in locating the correct mortise and lock (with keys). I have pics of the stickers on the door if that would help. I can email them. Thank you.

Doors are old and don't know brand. Bought from Lowe's but they don't have replacement handlesSorry can't remove or can't open door!