Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Looking for replacement parts for a casement window

Its a casement plastic slide track bottom guide that has broken Do you provide this part?

358-2 on arm of part

Hi. This little black piece, which says Roto" on it, goes in the glide channel to help the window close. It attaches to the arm mechanism which in turn is attached to the window. The broken off piece has GO41000. Thank you for any assistance!

Where do you get the plastic bracket that holds the opening rod from the operator in place. It is held in by two screws, approximately 1.5 x1.5 inches and has an approximately 3/4 inch collar centered in the bracket.

I?m looking for American craftsman window crank part .i think the window is a 7400 . It?s the black plastic pice that holds the window arm pice in place. It a large bow 4 window crank outs. The black plastic pice 2 of them are broken. Would like to order 2 or 4 of them .

The brand looks like Truth. The part number stamped on top is 30744. If you have the hinges then I'm probably going to want to replace the the seals and the crank as well.

hinge attached to window frame and to window so you can open and close it.

need to find replacement for NAMI casement window part. Need new operator (toothed wheel inside mechanism) and arms for right hinged window window numbers: NAMI NFRC-100; code: H110280-1; spec NFRC; series: CLCASE; MST: 280-M-006.7.14.15 Thesea re casement windows 0031-01284065 VTCASE #31-F-1 UN:1 ... (cont.)

Hello, I am trying to locate a replacement hinge, I am wondering if replacing the broken (black) adapter to reconnect lose hinge would fix the problem. Any advice is greatly appreciated.

This part is from a 2001 year Crestline crank out window. It is the part at top and bottom that slides in the window frame. The item had a black plastic part with a lip that slides in the window slot. I didn't see any part numbers or words on them. I think the top and bottom parts are similar or ... (cont.)

sill hinge has number 30752 stamped on it and the control arm has 30842R on it. Thanks. Sorry, I don't have it taken apart.

Looking for this size.

I need one of these retainer clips for a top hinge to a casement window

Hinge on silverline window top and bottom

1. Lock 2. Broken sash 3. Part needing screw 4. Handle that doesn't work need help replacement for window

Part 1 of 2 another email to follow this one I need more parts then this but you have a cut off limit on pictures you can down load I need the same parts for another window.I need: Casement operator and accessoriesHinge setLock

Hi, my name is Ed Pelli (401-487-3479).I was told that the hardware manufacturer for window is Truth Hardware;the white,right-hand crank (operator) is 5.5"wide(total length) with 2"mount where crank handle is. Hinge pieces are same dimensions for both top and bottom and measure 7-3/4"wide that atta ... (cont.)

IMG1512 is a keeper for an M&W window IMG1511 is a hinge set for an M&W window Both were purchased in 2003

Have 2 casement sash windows with Truth hardware. Operator on Right side is broken and I need replacement plus 3 sash locks. The photo is of the operational side but to show what we need. The other side that doesn't work has the little black part in the corner that seems to slide and isn't attach ... (cont.)