Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Please can u guys help I need the full mechanism opener please The lower bar and the opening system/ bracket

Attached are the parts that we are looking for our Silverline Casement windows. We have been told it is IMPOSSIBLE to get replacements for and I'm hoping me bumping into your YouTube video will start a wonderful business relationship with you as we go thru these parts like water and many of our com ... (cont.)

Hi Please see the pictures below I am trying to fix a window where the scissors jack is broken. Could you please assist.

HelloI have 5 of my Craftline 93-1 or 93- b windows giving me problems. One window is inoperable as what I call the slide portion is broken. This occurred after crank was reset in place. It turns out that the crank's operation is undermined by the stop for the arm or hinges is not performing as it i ... (cont.)

I need to buy one the all set

2 left 2 right

Hi Swisco, After 25 years the short arms are starting to rust out and becoming detached from the window. As a result the lower corner will not draw in tight as it should. In the attached the short arm has a marking of 3A818 and the long arm has a marking of 40052. Both of these markings are on the ... (cont.)

30132 stamped on side hinge

I have a rectangular window, long side is up & down. Outside dimensions 52X27 and inside 25 2/8 X 49 2/8 . Is a 2 pane Vinyl window. I need to replace Brackets, Casement Operators and Tacks. Pictures, attached. I am not familiar with the names of what I need. I looked at your web site to see what I ... (cont.)

The shaft has separated from the operator. The brass gear that locks in the shaft can not be screwed back in properly. So I believe I will need to replace the entire casement operator. I don't see the name of the window anywhere on the frame. I have attached pictures of the current casement oper ... (cont.)

looking for upper bracket on MW wood casement window from 1995 marking show TRUTH 30744 on one and 30744b on the other. Appear to be right vs left

Black plastic piece broke and I need a replacement. Window open to the right when looking at it from the inside

Looking to replacement casement hardware for BF Rich manufacture window. Hardware labeled "Truth"

Name on Hardware is Delmar Hardware Canada Canadian patent number 2012722 US patent number 4980947 I believe the manufacturer's part number was 55175999

I am looking for a part to repair one of my casement windows. Since I did not have the windows installed, I do not know the manufacturer. The only lead I have to go on is a serial number on the window bracket "40987". I do not need to replace the bracket, I am only looking to replace the piece(s) ... (cont.)

Hello,I am looking for parts for my Paradigm windows. I have 15 widows that need repaired. I need latches, operator hardware and bottom seals. I found a number on the operator hinge 40987 the hinge also has the word TRUTH on it. I also included the sticker that is on the window in the pics I sent. ... (cont.)

I am looking to replace a right window hinge. I'm not sure but I think it's a Marvin window. The hinge is stamped "Truth 30752". Any help you can provide would be appreciated.

I am in need of new hardware for a Certainteed Casement window installed in my home circa 1992. Windows are approximately 25-28 years old and look as new as the day they were installed. Except for one on the weather side of my house where all the hardware has rusted shut, or in a few areas, rusted a ... (cont.)

I can not find a window manufacture on the window - the travel guide on the bottom of the window sash is pictured the arm appears to insert in the black guide - I can't figure out how it is retained or if there is a piece missing or where to find parts

trying to find name of this casement window part. it's made of plastic or nylon and hold the top corner of window and allows it to slide and pivot from that piece when opening or closing window.