Viewing all customer Discussions for:

15-029 Winged Channel Balance Shoe, 7/8" Depth

I spoke to customer and I was told i need the bottom plastic piece replaced with product code: 15-005. I will be ordering 4 balances

I'm looking for a balance replacement. This balance measures 23 inches long (metal only, end to end). It has the number 2230 stamped on it. The plastic at the top extends out about 3/4 of an inch. The metal frame is approximately 9/16 wide and 5/8 deep.

Swisco: Seeking (2) replacement balances for same window, left and right side. Photos below. Stamped on existing balances --- CO3 / 11 Unique 28-F-60 Can you provide these, part number and price? Thank you,

Srings came from 2 windows same size 3 of the 4 have markings 22D and one balance has 22B

Stamp is very faded. May be A 8 B or P8B. 29 inches

I was wondering if I can get a price on two sets of channel balancers. They are 3/4" sq. X 30"l. The frame has a "b2940" stamped on it. I believe the windows are mfgd by Alcan. I'm guessing around 1992-1993. Thank you, Kevin W.

with markings of 3425 NL BSI Weight 27 bs.

These parts have come off my hurricane windows. The windows do not move smoothly up and down or stop where they are supposed to.

Hi, I need a block and tackle window balancer for a hurricane impact window sash. It says "Stamp F." If I understand correctly, that would be Stamp 2860. thank you, --Mike

Balance # 2320-24 in. Long- 5/8 in. Deep Top fitting is 3/4 in. Deep, 1 1/4 high Bottom fitting is 7/8 in. Deep, 1 in. High Sash guide is 3/4 in. Wide, 1 5/16 high If additional info is needed please let me know

Looking for a quote of (4) balances.

Good afternoon, I'm pretty sure I need the 27" Series 380 Channel Balance. Mine are very similar to the person in one of your discussion forums: https://www.swisco.com/discussions/2690-31-marked-on-the-balance--77-155704 Just like their channel balance, the depth of my bottom shoe is 7/8". The sta ... (cont.)

good morning I am needing your help in identifying the correct parts to order. I need balances for 7 windows as well as the plastic cap that is at the top of the track on the window frame (one each side) as seen in IMG_2626. the marking on the balance is 28D the metal part is 29 inches long 9/16" wi ... (cont.)

Hi The balance reference is 2950 the measure is 30" I must buy 30" or 29"Are both working the same? Please What is the exact reference to do the order? I will appreciate your help in this matter Thank you

We have channel balances with wings on the top and bottom, but a shoe that's less than 1". A Swisco agent says we should use a custom shoe: 15-029 7/8" We need 4 - 2340 We need 4 - 2305 Full Length 24" Let us know if you need anything further. Thank you. Doug and Donna

Good afternoonI followed the instructions on your website to identify and order a set or replacement window counterbalances. My order was for S350-30. I received the parts today and there is one small difference. It was very challenging select the top and bottom shapes from the pictures but I believ ... (cont.)

Look very similar to this one? My old spring was broken Would you suggest buying and 1720 or 1730 It's going to be different with the holes on. The window?

I need 2 Alcan window balancers: 18" long, 5/8"deep, 9/16"wide, with bottom shoe 15-029, top 19-005. And 3 locksets 90-180.

I am in need of (2) ALCAN 2930 and (8) 3620 Channel Balances - from 1990 Alcan windows. I am also in need of the snap in glazing. The glazing measures 9/16 (instead of the 7/16 that the 55-092 shows) and is 7/32 the same as the 55-092. Additionally, the window locks are 2 3/4 inch (2 1/4 inch center ... (cont.)

I need to replace my window channel balance. It measures 30" metal-to-metal. There's and engraved stamp of 2920 as noted in the photos. Please advised.