Viewing all customer Discussions for:

15-252 Inverted Universal Dual Support

Hello, I am trying to fix 2 different size Pella Windows and unable to find the correct size coil balances with the plastic stop hardware. Do you carry these items and if so can someone point me in the right direction? Thank you,

These are from Thermal windows. Any chance that you may have them?

Looking for a 15lb dual coil constant force balance for a Thermal 9500 series double hung window.

I'm looking for replacement window springs for a "Pella" window. Can you help me?Attached is a picture showing a number I noticed on a spring I pulled out. Hope this helps. ThanksMike

I am trying to see if you have the coil in stock - possible part number 96bu-5 OR i I know it is a 7 1/2 lb constant force spring - any help is appreciated.

I only have a picture and I know its a 20 lb. Only one window opens. Can you identify from this picture?

I do not have this balance removed, but it does have the number 14 stamped on it and is a double coil. Window is fairly large. Just want to make sure new ones support the weight of the Window. I would want left and right. If you need measurements of window, I would have to go back to rental and meas ... (cont.)

Looking for a direct replacement L shaped pivot bar for Kolbe windows that have the number 72521700 etched into the corners. No other markings on the window nor the broken pivot bar. Three screw holes secure the bar to the side of the window with a metal slide that slips along the bottom of the win ... (cont.)

I'm guessing that it is a double spring balance. There are 2 of them. They are in a Plygem 1500 vinyl double hung window. Any help would be appreciated

Balance for Ply Gem 1500 Vinyl Tilt Single Hung Window I am unable to find this hardware, are you able to assist

took these additional photos but aren't sure there was anything else I could take a photo of. Can you please let me know which coil balances, Tilt features and window locks I should order."

I have a four windows in which the sash keeps falling...... The hinge piece is nominally 5/8 in by 1 1/4.....(length is 1 7/8 in).......it's a fairly tight fit in the track ....... The sash has a 10# by 35 coil spring on each side for a total of twenty pounds ......Looks very similar to your model ... (cont.)

I need "constant force" type balances for a Pella fiberglass double hung window. Both sashes slip down in the track. Can these parts be replaced?

Triple coil balance damaged by window washers. Unknown manufacturer. Need help. Require both styles of balance. Each side of the window has a different style balance.

Need to know where to get these or a replacement for them these are pella windows

I have 1 side that has broken in half. Which 1 do you have that can repalce this one. Thanks!

Hello, This balance is from a Pella vinyl window model 150. The markings on the coil top row is #6.5 35" 145B Z Date is on the second row of 01/11/17 Top clear plastic piece that held coil in place broke. I'd like part numbers to replace the entire assembly if possible because the shoe lock is ... (cont.)

The spring holder has the number 11 on it. The pivot piece has the number 4 on it.

The window i weighed at 30lb. Each spring in the 2 spring units are marked 7.5lb 35 (maybe 35 is length ?? ) the springs are 1/2" wide.I removed both left and right side and to my amaze the springs (2 per side ) were not broken. (no cracks in the coil was visible) .The window has begun to slide do ... (cont.)

this is a tilt window looking to identify part number of counter balance shown in photo. Is there a left and right or universal . Note the markings indicate a weight of 12