Viewing all customer Discussions for:

15-255 3/4" Coil Single Support

I have several windows where the balance shoe is broken and when the windows tip in they have to be held in place by hand so I need to replace those parts. I can' find any part numbers on anything except img_1220

Hi recently bought a house and these simonton windows are installed but I have some broken pieces like these just need help identifying them and where to buy them. Thanks. As a result of this broken piece the top window of the double hung just falls down if it's not locked causing a hazard. Thanks ... (cont.)

Window manufacture is on the window lock - double hung windowsLooking for 4 complete coil balance sets (coils, coil support, etc.).as well as 27 springs 8 pivot shoes, and 14 pivot bars.

I am needing help locating this part for a tilt in window

I am looking to buy new balances replacements for this window. Specifically the upper. Also one of the stops that keeps the window from losing too much. 50DHWIV432.813x18.250

Was probably install like 25+ years ago. Need these parts. Thank you. Ed

The following is a list of windows I need a parts estimate for. These are Simonton windows, I tried looking up the coils, but was informed some of the stampings are no longer available, so I weighed each window. 3 windows 32 lbs each coil stamp 408 short tongue 409 long tongue 1 window ... (cont.)

Greeting: I am trying to replace the broken window coil balance springs on my bathroom window. Both sides are now gone. I've removed them both and neither side seem to have any markings on them. The window had been installed by the previous owner and i do not find any brands or other markings to id ... (cont.)

Cannot find any codess

I have ten Simonton double hung, tilt-in windows from the 90's that have issues. Several have broken either the pivot bar or the shoe, or both as I fix up this house. For the lower sash, weighed in at 15.4 lbs on the 31.5 width x 51 height windows, of which I have four, the coil is stamped "408" I ... (cont.)

Trying to figure out which coil balance pieces to order. The only marking I see on the coil itself is "406" Can you suggest some parts to try? I have a bunch of these that have failed on my house, these were installed in about 2005?simonton windows - various sizes. Appreciate the the help! ... (cont.)

The photo of the broken piece does not show the round metal part that the tilt part in the window slides into. There is no markings I can find. I looked online and couldn't find anything that looked like what I sent. This is a tilt in window.

I need this hope you can help me thanks

This part holds the upper window when it tilts out. The first picture is what broke off in the second picture. Do you have a replacement?Linda

I have 3 different sizes of Simonton vinyl windows I need to replace the broken balances. They have no markings on the coil springs. The first one has a top sash weight of 9.6 #'s and the bottom weight of 10.4 #'s . The second one has a top sash weight of 7 #'s and the bottom weight of 7.6 #'s. ... (cont.)

Looking for correct replacement balancer assembly as pictured, i realize the Simonton parts are obsolete, hoping you guys have a direct replacement. Really hoping to just unscrew the old and put in a new, not looking to rebuild or reconstruct anything. Can NOT find a "weight code" stamped anywhere, ... (cont.)

I am trying to get a coil balance to go onto the coil support. I purchased 4 of each and had no problems with 3. Could either the coil balance or the coil support be the wrong size.

I ordered the 15-259 coil balance pivot shoe, but the coil I have uses screws to attach to the shoe. I am assuming the 15-259 is not correct but I need a different coil/shoe part?

Single coil window balance (I think that is the correct term for the part(s)) for tilt out vinyl windows. Within the case with the philips screw is wide coil that allows the lower part of the window to open and close smoothly.

That's for a Simonton window.